Matrix user forums

Hi!
The RA4 is generally open-drain output.
The LEDs and a resistor in the VDD-to RA4.

8MHz clock ds18b20 the necessary work.

Thank you all for your help!
There will be an example-program package to Flowcode5?
Eeprom->Storing and retrieving Long(ULong) variables.
New adc functions. etc.

Thank you for your response.
I wrote Flowcode4.5 program continue in Flowcode5 .
Flowcode5 was only a simulation of a faulty, coded program is good.

Decision errors when testing two variables.
a = 1 AND b = 64 then c = 4

Hello!
I would like to write a lcd screen UINT, ULONG, and Long variables.
I see the V5 Flowcode LCD screen print numbers are manageable variables<= Int. A later improvement in the macro lcd?

Thanks for the quick reply.
Unfortunately I could not be downloaded, but I trust that you will be solving the problem.

Previously bought the Pic TEFLCSI5 Flowcode for professional licenses.
Unfortunately I can not download the Flowcode5 program.

The output was loaded 100nF ceramic capacitor Vcap?
http://ww1.microchip.com/downloads/en/D ... 41341E.pdf
5.0 LOW DROPOUT (LDO) VOLTAGE REGULATOR

Hy!

LCD D1-D4 are connected to PORTC 0-3

In the upper 4bit LCD display is used. D4-D7.
D4-> RC0, D5-> RC1, D6-> RC2, D7-> RC3

Hi!
Thank you for your answer, really helped a lot!
Charged flowchart simulator works.

Hello to everyone!
Can you help someone example program uses the MCP3421 analog digital converter?
I looked at the datasheet, but I can not find a solution.
Thank you for your help!

Not tested. 4*4 led matrix multiplex.
Good luck!