Matrix user forums

I attach the Benj FCDX file log.

I changed the files, not good.

It looks like the original FCD file for this board might be correct, as the STM32F051 Discovery board has onboard ST-LINK. When you plug the board into the PC USB does "STM32 STLink" appear in the devices list? Hy, Yes, it is installed. I made a little video. Driver / Atollic Truestudio / Flowcode ...

If this doesn't work then please can you tell us what name the board appears in the root "My Computer" / "This PC" folder. We are currently guessing it's like the others and called "DIS_F". No names found, no disk drive. I've updated the driver, no effect. I think he used to work well in win7. Unde...

Hello!

STM32F051 discovery program upload does not work.
Error message:
C: \ Program Files (x86) \ Flowcode 7 \ compilers \ STARM \ batch \ stm32prog.bat reported error code 1


STM32F303nucleo, STM32F746nucleo works fine.

Hello!

Controller: Arduino Nano (Atmega328 smd @ 16MHz)
The WS2812 LED does not work when data output is D0 and D1 (uart rx / tx).
Version Flowcode v7.2.1.4 here in the office, would not update if not needed (many projects would be affected by the upgrade).

Hello!

The WS28xx LED component can be manually parameterized.
Very good component.
One difficulty, interruptions (int, port) cause faulty display.

Hello, Glad you are able to compile again correctly now. Regarding missing COM ports have you seen this topic. https://www.matrixtsl.com/mmforums/viewtopic.php?f=68&t=19686 Hello! I identified the problem. Windows UAC's function is crazy. Even though it turned off, it still turned on and disallowed...

All controllers were defective. Unfortunately, this method did not work well.He was able to fix it quite complicated. 1. Usual installation (before Flowcode uninstall and delete folder). 2. Deleted Installed Program (Delete, No Uninstall) 3.3. From the old (full) backup I copied the old backup to th...

kersing wrote:Have you recently updated your Windows 10 installation or your Virus scanner? (Perhaps for the Meltdown/Spectre issues?)

Windows is up to date. The antivirus is Eset Nod32.
I turned off the antivirus, it has no effect on the operation.
I think I'm going to reinstall Flow7.2.

Hello, I get this error message for all types of controllers: Do not compiling hex to any controller. Flowcode7.3.0.5 Target folder: C:\flow\ULTRAS~1 Source name: C:\flow\ultrasonic\Flowcode1.fcfx Title: Description: Device: AVR.ATMEGA.ATMEGA328P Generated by: Flowcode v7.3.0.5 Date: Monday, January...

Hello!

Win10 64bit does not work, com detection.
Installed:
runtime 2008,
I installed the runtime 2015.
Does not work.
The old Flowcode6 dll file is copied, the port recognition in v7 works.

Hi Thank you for your reply ,I have done that in "device manager" the port is available for selection it is only in FC that it is not available :D Hello! I think this is a general RS232-injector bug. Arduino nano328 does not work. I can not select the COM port. Clean installation, Win10 proff 64 bi...

Opened in Flowcode v7, there are two pushbuttons. Port A0 and PortA1 connected. I upload a Flowcode v6-v7 compatible program. When the switches are pressed no LEDs light up. I think it is opening it wrong on my laptop for some reason, I'm guessing as I can see it works on your You tube video fine. ...

Opened in Flowcode v7, there are two pushbuttons.
Port A0 and PortA1 connected. I upload a Flowcode v6-v7 compatible program.

Jacob1 wrote:

STibor wrote:sheep_counteer_2.fcfxHello!
I used an internal rotary encoder component.

The program does not seem to work? I'm not sure how the encoder works and when the simulation is played two LEDs light up.

Maybe I do not understand the question.

https://youtu.be/wyFQ1l6FkWI

Hello!
I used an internal rotary encoder component.

Hello! Available soon. Would not it be good to develop it? http://uk.farnell.com/stmicroelectronics/nucleo-h743zi/dev-board-nucleo-144-cortex-m7/dp/2776646?ost=NUCLEO-H743ZI&iscrfnonsku=false&ddkey=http%3Aen-GB%2FElement14_United_Kingdom%2Fsearch STM32H743ZI Key Features Core 32-bit Arm® Cortex®-M7 ...

Hello!

I think this is a "wonderful" Windows error or other hardware / software problem.
It is worth checking out the hard drive. (chkdsk X: / F / R)

Hello!

If you open the project file with notepad ++, the last entries are incorrect.
I changed the wrong entry and I think it was good.

Hello!

Test it.

Thank you very much!

Hello, An updated PWM component is defective. C:\PROGRA~2\FLOWCO~1\COMPIL~1\pic\sources\common\lwtoft.c: 31: (1360) no space for auto/param FCD_0df41_PWM1__SimDrawDigitalWaveform@FCL_RSTR (908) exit status = 1 (908) exit status = 1 C:\Program Files (x86)\Flowcode 7\compilers\pic\bin\xc8.exe reported...

Please try this (drop it into .. Flowcode7\CAL\STARM) Thanks for your help! Using the modified file, the 8-bit output is about three times faster. Can not write direct port for 16 bit output? Do you need bit shift operations? I would like to use a graphical display (SSD1289 or higher resolution LCD...

STibor wrote:Hello!
The total port write is only 206-209kHz.

Hello!

Do you have a solution to increase port and full port speed?