Matrix user forums

Hi karoubas! Don´t know if it is the same as in the other display. But you need to give the display some more info (setting) I change a little in your program, maybe it can give you some help. now it work in simulation but slow, maybe a "heavy display" need a fast processor. But look good, and expen...

Wow you are fast. Ver. 17 better but not 100%

It is the Ili9141 seriel. Look above , you are faster than me

Hi Ben! Give you answer here :wink: : Thank´s for your effort, 1. But sadly no. Picture ver10 ok But pictue V16 not good. Please have a look on the att. picture. And Ben there is also different problem with the Ili9143 display in FC9 or is it me who not know how to use the new setting? No matter wha...

Hi Martin! Ok, sound good, look forward to test. :wink: Hopefully it in the end it will work and you/MM can create a component for this display like the other in FC. And yes, st7789 doesn´t work in FC9 either Ili9341 :( I would like to pay your shipping costs, tell me? If you want, I would like to s...

Well ok Steve, thank´s for reply. Hope you/MM will have a look on my reported bugs.

Jorgen

Hi Steve!

Thank you,I know that. I mean, why is it moved to another place. Here we have an overwiev of all Fc version. And the new, black

Br Jorgen

Hi! Just install trial FC9. 1. Test the Ili9341 because I use it in a project in FC8 (Look here, not working ether https://www.matrixtsl.com/mmforums/viewtopic.php?f=78&t=22469). Only if I go back to version 10 it´s ok. Would be nice if it could be "repaired" too. So I though maybe it is fixed in FC...

Hi Martin!

Have you seen that the st7789 display is on the componentlist Have you test it?

I will perform a test tomorrow.

Br Jorgen

Hi MM team!

Kindly, something new?

Br Jorgen

Hi Ben!

Now I have made a lot of test with the v.10 Ili943 component, and it semed to be ok I don´t know what the difference is from V.10 to V.15, but is there nothing concerning the X and Y cordinates you can use in v.15 from v.10?

Br jorgen

Hi again!

I have now tested further. it is also not possible to make rectangular and then fill the color with a foreground color.

Then I try to go back in version. I have to go back to ver. 10 for the Ili9143 komponent before it seem begining to work correctly?

Jorgen

Hi Ben!

Thank you. a Little better no mirror any more, but something is wrong with X and Y it is not moving the text always. When I simulate it is ok. but not
in real world

Thank´s Alkaline for info, mine is serial. Hopefully MM guy´s soon fix it

Jorgen

Just made a test with the new display, They work fine all of them with the Arduino Ide. (Clock and Ds18b20) and 2k7k

Send me your adress and I will ship one for you which I have seen working here, then you can test too, if ok. Maybe they are different.

Jorgen

ok Martin I agree, like it too. I have just received 5 new from Ebay I will test them.

well ok Martin! Not good. Maybe we should drop these display?

Hi Martin! First when you test with the resistor in serie, use an unused display. My experience, first test with 5V without resistor display damaged. Here you can find all the information of the clock: https://github.com/cbm80amiga/ST7789_Watch_2bit https://www.youtube.com/watch?v=jFGDFuLhdMc&featur...

Ok Martin.

Try to of course the supply directly to 3,3V and the datapin with a resistor 2k7 in serie to the datapin. This is what I have don

Hi Martin Glad your working well. I hope you slept well despite the cold in your bedroom :lol: No unfortunately no progress here. I have tried several times with the same configuration and pin connections. I have checked these several times. I have not been able to watch ABCDEFGH again. But I can se...

Orient 3 also like mirror.

As you see, something wrong. Hope it help and make sense. And again this occour after last update of this display. Earlyer it was ok.

Orient 2 look like mirror looking in mirror

Orient 1 Not ok. Deleting is also not working when use orient 1

Orient0: Seem to be ok!

Hi Leigh Sorry have to upload 3 times