Matrix user forums

And:
Thanks
Stuart

Hi Jac,

This is the info for the driver:
Thanks
Stuart

Hi Jac,

It should be ok now.

Thanks
Stuart

Hi,

I am not sure if this is a bug or not when trying to change settings:

https://www.youtube.com/watch?v=4H6UsNX ... e=youtu.be

Thanks
Stuart

Hi Martin,

Yes I have purged all the com ports that were not being used as it was up to 10, it is now Com3.

Thanks
Stuart

Hi Jac,

I don't have any options to change when Yun is selected as a target device...

Thanks
Stuart

Hi,

I know Avr dude dosen't like high com ports so I purged mine and got the Yun on Com3 3 but I get this error:
Thanks
Stuart

P.s. I have just ordered a genuine Arduino Uno to see if that will program

Hi Jac,

I have just plugged my Yun into my desktop Pc which has Windows 7 not 10 and running latest build of Flowcode, avrdude detects correct com port 10 but returns this message when I try to program to chip:
Thanks
Stuart

Hi Jac, Yes I did what you said clicked on it and then selected the only setting which gives the box some marching ants, also I tried editing line 6, it says com port 7 and 57600 baud, however when I try to program avrdude says com port 6 57600 baud, if I edit and save the file to com 6 9600 baud, a...

Hi Jac, I have just tried what you suggested but still the same: comport.png I have also edited the FCD file as Ben suggested but avrdude is still using baud 57600 when I change to 9600, am I editing the right line ? avrfcd.png Thanks Stuart P.S. I want to try 9600 because this is what the Arduino I...

Hi Ben, Yes that's what I thought, In my attempts to get the Ds18b20 working I am trying anything and everything really, my Uno's are not genuine but my Yun is so I thought I would try that, if I open Arduino IDE and select Yun on Com port 6 then it uploads no problem, if I then close the Arduino ID...

Hi, I have an Arduino Yun that is on Com port 6 and programs ok with the Arduino IDE but when I try to program using Flowcode it says that it can't communicate with the programmer, all the settings for programmer are greyed out so no option to change baud rate etc, any help appreciated. yun-error.pn...

Hi Jleith,

I have just had a quick look at your chart, should your first eeprom macro be reading address 1 and not the variable value "button" ?

Thanks
Stuart

Hi Jac,

I will just put my project on hold until we can find out what is happening, thanks for all your help.

cheers
Stuart

Hi Jac,

Right with a new setup on a breadboard, new 328p and serial cable connected, these are the results:
Thanks
Stuart

Hi Jac,

Just checking, on my usb serial lead do I just connect ground to ground of breadboard and Tx & Rx to D0 & D1 ?

Thanks
Stuart

Hi Jac,

Yes I have got a 3.3v and a 5v usb serial leads, so I will have a go at that now.

Thanks
Stuart

Hi Jac,

I have also tried moving the delay forward a macro, and increasing the delay to 3 seconds, however I still get 0 device count.

Thanks
Stuart

Hi Jac,

I have placed a 1 second delay before the first one-wire macro as you said and this is what comes up in Putty now:
Thanks
Stuart

Hi,

I have the data wire on digital pin 2 but judging from the results nothing has been found, I will have another try after work tomorrow.

Thanks again
Stuart

Hi Jac,

Thank you for your test program, I have used a new Uno and connected another ds18b20 as you said, the results from Putty are pasted below:
Thanks
Stuart

Hi,

I have just received a new breadboard so I am going to build it all from scratch with new components and see if things change.

Thanks
Stuart

Hi Jac, I know that Bachmans post is about Pic devices, but after the lengths that I have gone to, to test this on the AVR platform and also getting other members to test, I am thinking that this problem is present on Pic devices and AVR devices, I am not using parasitic power to power the sensor, t...

Hi,

In this post Bachman has submitted a bug report for this issue:

http://www.matrixtsl.com/mmforums/viewt ... b20#p71865

If it is getting rectified in the next update, I will just have to wait until then.

Thanks
Stuart

Hi jac, No it works on an Uno programmed via the Arduino IDE with a sketch that I got off the internet, I tried the chart of Martins that was supposed to work but it didn't work, Dazz tried it also but he couldn't get it to work either, that is when I thought if it works on the Arduino then I will g...