Matrix user forums

Dear Sir:

Your example is very interesting for me, thanks, but I have one question additional, you used to print into LCD the variable ASCII, but is possible to load each digit in a individually variable (255)?, It is necessary because I have to print each digit individually

Thanks

Dear All: I have a question, I made a program where I have to print the ADC value in 1 Intelligent display OSRAM PD4437, but I don’t know how?, this display needs a ASCII value for each digit¡ 1.- how to split the ADC value in a individually value, this mean as example ADC value is 450, I have to...

I just changed my workstation, and it use WINDOW 7, when I try to install my Flowcode Ver 3.6 , and when the PPP is being installed the system show me an error “DPInst.exe does not execute on your current Operating System”, and the option of configuration does not work, Why? what can I do ? Thanks

Dear All:

I not sure if Flowcode V3 has an option / function to count an external signal coming from a external sensor (hall sensor of photodiode), this is to create a Tachometer, I need to control a speed of gas engine and show a RPM in 7seg display or LCD

Thanks

Dear All: I bought a “Intelligent 4-Character 5x7 Dot Matrix Alphanumeric Display” OSRAM PD4437 for test, but I not sure how to work it, The Display uses 8 pins for data (From D0 to D7) and 7 for control, I made a test but It does not work, could you be so kindly to check, I not sure I’m in th...

Dear Sir:

I just re program 2 chips ATMEGA 32 using a low clock (250Khz) and the original fuses ware reset, but I still have problems with ATMEGA48 (3CHPS) I not sure the fuses programmed, what Can I do to recovery from the lock-up

Thanks

Dear Sir:
I tested the USB Serial Component, but It does not work well, some times Works some time not work, could you be so kindly to check it, may the config. is not OK

Thanks

PIC target: PIC18F4550
Clock: XT 4 MHz

Dear All: I’m a PIC user for 2 years, now, I m testing FLOWCODE for AVR (demo) and it work excellent, but I have 2 questions: Question A: configurations bits are structured in 3 pars (ATMega32) High, Low and Extended Fuses (showed in HEX format) I read the datasheet for this Chip from ATMEL, but I...

Dear Sir:

Finaly the C Code Works OK, I had to chage from DS1820 to DS18B20, I tested the circuit but when the temp. donw under 0.0°C , shows doble “-“ example -05.-45°C or -15.-74°C, one for units and second for decimals.

what can I do

Thanks

Dear Sir: The FC files are already compiled (OneWire and MultiOneWire), but FC show me some warnings Warning unreferenced functions removed: FCD_Custom0_GetDefines in: C:\Documents and Settings\Propietario\Mis documentos\Ds1820\DS1820 Multiple\Multiple\Multiple One Wire Example.c FCD_Custom0_oo_get_...

see previus post / Part B:

(See files)

Dear Sir: 1.- I re-install the FC program ver 3.6.11 2.- I download the file Custom_Code_OneWire.c from Web and re-name it to Custom_code.c and copy the file into Flowcode V3/Components folder as your instructions 3.-I download and test the file called 1 Wire Example, the FC still show me errors see...

Dear Sir:

FC File, C File and error file are included please check

Thaks

Armagon

Dear Sir:

Do you have any comment ??

Thanks

ARMAGON

Dear Benj:

I did it, but I cant compile the file, the FC show me 3 errors (See anex)

What I should I do?

Thanks

Dear All: I download the test file called “Multiple one wire example”, to connect and test 2 DS1820 sensors, but when I tried to compile, the Flowcode v3.6 show me a list of errors (see annex) I saw into the FC file some macros are empty, may this is the reason, I’m not sure how to complete th...

DEar Sir:

I re-work using the clock of FC examples, and I made some modification the time can be set at 999 Sec = 16 Min + 40 Sec

Please check,

Thanks

Armagon

Dear Sir:

I just made a program, I used info from FC examples, please test the file, your comments will help me

Thanks

Armagon

Dear Sir:

the file is included, see and check

Thanks

Armagon

Dear Sir: Thanks for four assistance, but I saw into the file and I made some modification (remove temperature, and count up become to come dawn), but finally the program become a disaster, the project is a simple double count dawn (on/off/on/off…) adjustable by the user, could you be so kindly to...

Dear Sir: I tried to open 2 files in this post, but the program show me an alert¡ “”Unexpected file format”” could you be so kindly to send them me, I like to see them how them works? File A: Stopwatch4 using wrong switches.FCF File B: Test_V4 port_inc.FCF (Which is the final project?) Than...

Dear sir:

Thanks a lot I waiting for you example

Armagon

Dear All:

Thanks for your help, but I look in to example but it still a Little confused for my, I don’t have Idea how to set the time by the user using e-block switch, and then make to count down in 2 clocks?

Thanks again

Armagon

And EB006-00-5 E-Block Multiprogrammer

Thanks

Armando

Flowcode Ver3Β΅

Thanks

Armagon