Matrix user forums

Hi LeighM
Thanks for the answer.
It was something that worked
Thank you very much for your help.
Have a really good working day

Hi LeighM Thanks for the answer. I have to ask you another question? Would you like to help solve the problem with getting read out Date;-) Please see below and attached coder... But in practice will only show the bottom line as "Data is // DisolayShow.JPG When simulating in Flowcode is shown as be...

Hi LeighM Thanks for the answer. I do not understand how to read digital in another way ? Component of Miac_dsPic I can read that there are Inputs 1-8 InputDIGITAL ????? So I do not understand how I can read these InputDIGITAL otherwise. Do you have a simple code eksemple on how I can read the Puls...

Hi LeighM
Thanks for the answer.
These were some codes I found on the forum.
Do you have an idea on how to read pulses on Input on I6 or I7

Hello everyone
Does anyone want to help get dsPIC to read pulse in to work?
Wish to use Pulse In [E1] and or [E2]
Want to be able to read the square frequency between 0 and 400
Can't see any result in the display...
File attached:

Hi Benj
Just found out that LINAK AKTUATOR LA37 is defective .
The spindle motor works
But the signals from LINAK ACTUATOR Hall A and Hall B no longer works!

Good working day for you.

Hi every one Problem with my solar tracker Uses ECIO40P for tracker control LINAK ACTUATOR LA37 can now only run in or out. But Hall A and B no longer work :evil: So why do I want to change the codes a bit? Want a driving range at minim Down> 40) AND Up> 50 Max A certainty that the tracker works in...

Hi LeighM
Thank you very much for your help.

Hi LeighM

Again tried to reinstall Flowcode v6
Has set the OK button of the Project Options dialog and save the change.
And now I can simulate the codes;-)

Hi LeighM
"Make sure to save the project after editing the project options and then the change should also persist when reloading the project."
I do as you describe but without success. But stays at 0.25? on startup again.
Run your Flowcode v6 on server?

Hi LeighM
The Strange,NOT works for me!
(you can move the simulation speed to the normal position. I do this too.)
But once the Flowcode has been restarted. After having the saved setup as you describe "simulation speed"
But stays at 0.25?

Hi LeighM Have constantly done as you and others describe! But without luck are you saying that the sim speed does not change to Normal, but stays at 0.25? But stays at 0.25? Have done what you describe By a new simulation that starts simulation "0.25" Even if the layout is saved as "Normal". Pleas...

Hi LeighM Trying to use The Flowcode simulation step and breakpoint functions! But in Simulation speed I can only set the number "0.25" can choose others but at the start of Simulation it returns to "0.25". Want to set simulation step to Normal and be able to save the selected number. ProjectOption...

Hi LeighM Trying to use The Flowcode simulation step and breakpoint functions! But in Simulation speed I can only set the number "0.25" can choose others but at the start of Simulation it returns to "0.25". Want to set simulation step to Normal and be able to save the selected number. ProjectOption...

Hi LeighM
Have made RTC Date and Time work outside the LOOP where Time and Date were first set.
That was the only way I could get RTC to work outside the setup.

Do you have a better proposal for codes?

See update file below!
Attached file:

Hi LeighM I Want like to be able to use RTC anywhere in the codes also outside RTC - LOOP-END Want to be used outside the unit RTC LOOP END Attached file: MIAC dsPICSetting SolarTracker_05-03-2019.fcfx The code below does do not work globally. works only in the same LOOP END .. . MIAC dsPICSetting ...

Hi everybody

Can't use RTC (MCP7940N) (Storage) globally in one's codes ???????

Hi LeighM
Thank you very much.

Display not updated?
Display update only when resetting dsPIC
Do you have a suggestion for the problem here?

Attached file:

Hi LeighM
One return the values?
I do not know what you mean.
There must return a Code and how it is written.

Hi everybody
Is there anyone here who can give me a code example of setup serial eeprom.
Please see above attached file!

Hi Benj Has added "Serial EEPROM (24C32)" component... Want to print as Elevation: 25.2 Grades And Azimuth as 205.5 Grades Would you like to help with an example? I'm thinking I'm doing something wrong Udklip-1.JPG And Udklip_2.JPG Please see attached file: MIAC dsPICSetting SolarTracker_04-03-2019...

HI LeighM Have here tried to make EEPROM work but without success. But get a lot of error messages ? Can you see where it goes wrong. And you have a suggestion ! Compiler Messags: Target folder: C:\Users\sun\Desktop Source name: C:\Users\sun\Desktop\MIAC dsPIC Menu Flash-003.fcfx Title: Description...

HI LeighM
No, I did not show that dsPIC has an internal 24C32, 32Kbyte EEPROM
Have searched a lot on Flowcode forum.

Of course I would like to use this internal EEPROM. OK
Do you want to help with an example of Save and Load - retrieve data from the EEPROM dsPIC has an internal EEPROM.

Hi everybody Can I use EEPROM 3 click? Along with Miac dsPIC Where Date Time can be saved and read from elsewhere in the codes? https://www.mikroe.com/eeprom-3-click If EEPROM 3 can be used with Miac dsPIC (MI5009) how to connect EEPROM 3. Would you like to help with a description of the connection...

Hi everybody Have tried many days with getting attached file to work, but it is not successful yet ! Is there anyone here who has a proposal all suggestions are very welcome ? Description: Want to be able to edit DATE and Clock on startup. And then leave the setup and print elevation azimuth in a n...