Search found 438 matches
- Sun Jun 30, 2013 9:18 am
- Forum: Flowcode V5
- Topic: pin c0 inop confusion
- Replies: 7
- Views: 4106
Re: pin c0 inop confusion
hey martin, its not only c0, i also tried it on c1 and it did the same thing, the c2 input did work through out the whole process which is the cs for the second eeprom chip.... i converted flowchart to TMR4, changed a couple things in the flowchart that i screwed up on (noticed with logic16 :lol: )a...
- Sun Jun 30, 2013 3:05 am
- Forum: Flowcode V5
- Topic: pin c0 inop confusion
- Replies: 7
- Views: 4106
Re: pin c0 inop confusion
just tried it with a simple blinky with no go
- Sun Jun 30, 2013 2:31 am
- Forum: Flowcode V5
- Topic: pin c0 inop confusion
- Replies: 7
- Views: 4106
pin c0 inop confusion
with flowchart below there is communication between this chip and two different eeproms, with the code how its written the chip select for chip#1 which is pin C0 doesn't work! you can move this to any output pin on the micro as long as its not on PORTC and it will work i did a bunch of testing and c...
- Fri Jun 28, 2013 8:28 am
- Forum: Flowcode V5
- Topic: signed char questions
- Replies: 2
- Views: 2508
Re: signed char questions
With arithmetic, whether a value is signed or unsigned only makes a difference when performing comparisons, divisions and when it is displayed i see what you mean, a signed int variable of -2 would actually be a 65534 ms delay, that answers alot of questions thanks for explaining and i came up with...
- Thu Jun 27, 2013 8:37 am
- Forum: Flowcode V5
- Topic: signed char questions
- Replies: 2
- Views: 2508
signed char questions
- have some general Q's - can i store signed char's to arrays and luts? - can i convert a unsigned char or unint to signed with it not remaining positive if i inteded negative for that number position, for instance if i store a unsigned 2 in an array and transfer it over to a signed variable how can...
- Sun Jun 23, 2013 3:48 am
- Forum: Flowcode V5
- Topic: draw on the display
- Replies: 4
- Views: 3274
Re: draw on the display
what do you mean?
- Sat Jun 22, 2013 5:59 pm
- Forum: Flowcode V5
- Topic: graphic backcolor
- Replies: 4
- Views: 4027
Re: graphic backcolor
hey ben, it didn't work with your code mod but it works with this char msb, lsb; Red = Red >> 3; Green = Green >> 2; Blue = Blue >> 3; lsb = Blue | (Green << 5); msb = (Green >> 3) | (Red << 3); %a_UART_Send('B');// send backcolor command 'B' %a_UART_Send(msb);// Send msb %a_UART_Send(lsb);// Send l...
- Thu Jun 20, 2013 6:23 pm
- Forum: Flowcode V5
- Topic: graphic backcolor
- Replies: 4
- Views: 4027
Re: graphic backcolor
i haven't had a chance to try it but have to send a asci 'B' then 16bits of color and wait for a 0x6||0x15 to return, it kind of sucks when printing with transparent 0 it prints the background color of what ever was choosen from the glcd properties, ben help us out 8) 3.1.4 Replace Background Colour...
- Mon Jun 03, 2013 8:37 pm
- Forum: Flowcode V5
- Topic: Making a 24 hour clock
- Replies: 4
- Views: 3748
Re: Making a 24 hour clock
yes, thats why i posted it, that works great for a 328p, not sure about the one you are using... im using tmr1, also look at the tmr vector code, i can show you how it works when i get off work in 6 hours with a video {edit} oops i guess i did use timer1, but i used compair instead of overflow as it...
- Mon Jun 03, 2013 8:12 pm
- Forum: Flowcode V5
- Topic: Making a 24 hour clock
- Replies: 4
- Views: 3748
Re: Making a 24 hour clock
here's a avr 328 arduino clock project i coded for a friend, can set the time hours,min,days, and displays in am pm format, it has tmr1 running at one hz, if can follow code sorry its in c, as it the closest thing i have to avr /* DAY ZERO IS MONDAY (0-6) HOUR ZERO IS 12AM (0-23)*/ #include <LiquidC...
- Fri May 31, 2013 5:18 am
- Forum: Flowcode V5
- Topic: Memory Error
- Replies: 2
- Views: 2349
Re: Memory Error
i think it might be a computer registry error, try doing a reg scan, sometimes my computer does this but when it happens to me if i was working on anything on the flowchart i loose it :( , i never know when its gonna happen so if im working on something hefty i usually save before i simulate just in...
- Mon May 27, 2013 10:51 pm
- Forum: Flowcode V4
- Topic: 8bit lcd display
- Replies: 4
- Views: 4440
Re: 8bit lcd display
it would be 200u/s per char since it would be sending a full byte instead of nibbles, i don't understand how the defines are used from within flowcode so sorry can't help with the mod's,
- Mon May 27, 2013 8:37 am
- Forum: Flowcode V5
- Topic: bitbang spi receive(software spi/64)
- Replies: 0
- Views: 1990
bitbang spi receive(software spi/64)
it might be something that may be somewhat useful, this flowchart only works with SOFTWARE SPI/64 as its alot slower than hardware spi, clock = b0 sdi = b1 chip select = b2 comm receive.fcf it can work with any bit type automaticly from 0-31 bits because when chip select line goes low is shifts the ...
- Fri May 17, 2013 6:23 pm
- Forum: Programming Tips & Tricks
- Topic: calculation tricks
- Replies: 3
- Views: 5583
Re: calculation tricks
I'm afraid I noticed a couple of issues: thanks kersing, i see what you mean on the (a&&b&&c)>10, it doesnt work the way i thought, when i tested it to see if my understanding was correct on it, i must have tested it in a way that just happened to give me what i thought could be interperted as this...
- Fri May 17, 2013 2:59 am
- Forum: Flowcode V4
- Topic: pic 16f1828 not suported part
- Replies: 5
- Views: 5504
Re: pic 16f1828 not suported part
on the 16f1800 chips, flowcode with pickit2 doesnt work, but pickit2 standalone programmer does, compile to hex then program the chip with the pickit software, that should work for you
- Thu May 16, 2013 5:23 am
- Forum: Programming Tips & Tricks
- Topic: calculation tricks
- Replies: 3
- Views: 5583
calculation tricks
by putting this in tips tricks section was hoping to learn better coding myself and make it easier to find for others in future if others will add to these variable=variable|1<<7//set bit 7 in variable variable=variable&~(1<<7)//clear bit 7 in variable variable=variable^1<<7//toggle bit 7 in variabl...
- Sun May 12, 2013 7:44 am
- Forum: Flowcode V5
- Topic: 18f4580 and 4D systems 2.4PTU circuit
- Replies: 9
- Views: 4460
Re: 18f4580 and 4D systems 2.4PTU circuit
was curious, what if you download this personality file into the 2.4" display https://dl.dropboxusercontent.com/u/10367218/uLCD-32PT-I-SGC-R22.PmmC then use flowcode to command to it, what you would be doing it telling the picaso that you have 32pt display, this might give you flowcode control over ...
- Sun May 12, 2013 6:54 am
- Forum: Flowcode V5
- Topic: Different crystals
- Replies: 3
- Views: 3020
Re: Different crystals
i dont know but i would imagine it would have to do with assemby code and instruction cycles, the 19.6604 crystals dont have a very good ppm value as they are about 30, i find the 16 mhz crystal has low ppm of 10 and the flowcode delays are very accurate at 16mhz, check the a 16.384 mhz crystal http...
- Mon Apr 29, 2013 8:02 am
- Forum: Flowcode V5
- Topic: graphic backcolor
- Replies: 4
- Views: 4027
graphic backcolor
with the eb076 is the change back color broken, when i use the icon it corrupts the program, would be nice to be able to use that to change the back color behind printing numbers, currently i dim the forcolor to the back color to make the area behind the strings match when i print " " when number di...
- Thu Apr 25, 2013 12:43 am
- Forum: Flowcode V5 Issues
- Topic: Avast see Fowcode dspic as a Malware
- Replies: 12
- Views: 14548
Re: Avast see Fowcode dspic as a Malware
to note i've had system mechanic in the past remove certain item's from registry on the ppp side, to where i had to do a fresh install on flowcode, sometimes this stuff happens, it might pop up as a problem out of the blue then go away when they figure it out from the feedback
- Mon Apr 15, 2013 2:45 am
- Forum: Flowcode V5
- Topic: rc5 inop for 18f2685
- Replies: 0
- Views: 1538
rc5 inop for 18f2685
rc5 doesnt work on this chip? at least with the flowcode that i tried, if get working can it be set up for tmr0 instead of tmr2? can someone point out how i would know by looking at the code which timer interrupt or interrupts the macro uses, its nice to know these kind of things on various chips th...
- Wed Apr 10, 2013 3:13 am
- Forum: Flowcode V5
- Topic: Cannot get touch screen display to initialize
- Replies: 12
- Views: 9993
Re: Cannot get touch screen display to initialize
dude check it out: upload pmmc file here and all will work https://dl.dropbox.com/u/10367218/uLCD- ... C-R22.PmmC test to be sure
heres the link i got it from http://www.4dsystems.com.au/prod.php?id=113
its SGC not gfx
heres the link i got it from http://www.4dsystems.com.au/prod.php?id=113
its SGC not gfx
- Wed Apr 10, 2013 1:14 am
- Forum: Flowcode V5
- Topic: Cannot get touch screen display to initialize
- Replies: 12
- Views: 9993
Re: Cannot get touch screen display to initialize
I am not overly familiar with C code so i hope i have this right, looking in the component macros for flowcode, a clear for example is 0x45 however with the new display from the reference manual it is 0xffcd. At a brief glance all the commands are 2 bytes long. How much work would it take to update...
- Mon Apr 08, 2013 4:26 pm
- Forum: Flowcode V5
- Topic: ulcd-32ptu
- Replies: 2
- Views: 2181
Re: ulcd-32ptu
ben, here's what i received in comments from 4d SGC has been discontinued and is not available for newer displays. 4D Serial is the new Serial and ViSi Genie are new and both support being controlled as a serial slave. Are you using some third party library with flowcode5? If so, where did it come f...
- Fri Apr 05, 2013 9:40 pm
- Forum: Flowcode V5
- Topic: ulcd-32ptu
- Replies: 2
- Views: 2181
ulcd-32ptu
i bought eblock with the old lcd, then picked up a couple of the newer ulcd-32ptu lcds http://microcontrollershop.com/product_info.php?cPath=528_189_408&products_id=5396 , with the new displays i only get the splash screen, does anyone know what i have to do to get these working to accept serial com...