Matrix user forums

Hello!
I checked the SPI data line logic analyzer.
The initialization did not match the Arduino example applications.
Slightly modified the program.
The maximum transmission distance of 5 cm.

I think I was good.

Hello medelec35!

Also, check with the following types:
PIC18F25K80
PIC18LF25K80
PIC18F26K80
PIC18LF26K80
PIC18F45K80
PIC18LF45K80
PIC18F46K80
PIC18LF46K80
PIC18F65K80
PIC18LF65K80
PIC18F66K80
PIC18LF66K80

Hello! Very good macro RFID, quickly scans the ID. The sensitivity is very low. The Arduino library sensing distance of several centimeters in any RFID card. The Flowcode macro distance of 0.8cm larger RFID card, the small card 0cm. The sensitivity to be increased? How could the RF excitation power,...

Hello! (PIC18F25K80 internal clock) (Timer1 external crystal) setting. If the Timer1 interrupt 32,768kHz external clock crystal, it gives the compiler error. nagykijelzos_ora_v2_teszt.c(441:22): error: unknown identifier 'T1SOSCEN' nagykijelzos_ora_v2_teszt.c(441:22): error: failed to generate expre...

Hello! Thank you! I tested the module. The results are very good, the program works. There are so many mistakes that: After init of the 1-4 information is incorrect. For example: RFID Init okay 7,0,0,0,0 bad value 1,0,0,0,0 9,212,9,3,77 good value 9,212,9,3,77 9,212,9,3,77 9,212,9,3,77 9,212,9,3,77 ...

Hello!
Thank you for your component!
I have RFID hardware, tested in the evening.

Simulation image attached.

Hello!
Clear digits macros will not work?
If there is no common inputs, you can not negated the common input output.

This example is simpler than the previous one.
An example includes two variable arrays. Common anode or common cathode display.
Previous examples can be problematic (stack owerflow) interruption.

Hello!

Without component.

Hello!
Same result.
Fat32/SD Card component does not use a bigger array element 256?

Hello!

Added to the code and the error message.

Hello! This is a big problem! Flowcode V5 Build menu /compiler: -v -t PIC%p "%f.c" -idx 2 Linker/Assembler: -ld "C:\Program Files (x86)\Flowcode\v5\Tools\BoostC\lib" large\libc.pic16.lib large\rand.pic16.lib large\float.pic16.lib "%f.obj" -t PIC%p -d "%d" -p "%f" -idx2 Flowcode V6 not working. What ...

Hello!

I see that there is a Modbus master component. (I have not used this component)
It is possible that in the near future will be Modbus slave components?

Thanks for the reply!

Hello! The SSD1289 graphic LCD requires a 3.3V logic supply. Arduino Mega 2560 logic voltage to 5V. Do you use 5V <-> 3.3V voltage converter shield? Etc. http://www.hobbielektronika.hu/forum/getfile.php?id=233929 The linked Arduino shields port assignment is random, Flowcode data ports (data port lo...

Hello!
I tested Arduino Mega 2560, it was not good.
Unfortunately, I do not know what can be a problem.
Each RFID card given the same ID.
I read the UID would be enough.

Hello, 1. Power Card Recognition (yes / no) okay. 2. Data readout: changing the read data and then stops at a value. 3. The same data read all card. I tried an Arduino library. The same hardware (mega2560), the same electrical connections. Arduino works by example. Arduino lib: https://github.com/mi...

Hello! The problem was that for the first time generated component, and the component was tested. I tried the MFRC522.fcf your program, this data has come. The problem is that the data is the same as two RFID card. Every time you turn on changes to the data read from the seventh. This picture shows ...

Hello!

The card recognition okay.
The ID readout is not working.
What is bad?

Hello!

Can you generate a component file?

I can not.

Hello!
Thanks for the quick help!
Tomorrow I look at hardware.

Hello,

Benj Thank you!

Unfortunately, these modules are not available to me.
As you can tell processed by a micro controller chip serial data and builds up in the RFID chip transceiver protocol.

Hi! Do I have a very urgent RC522 component of the macro. http://www.ebay.com/sch/sis.html?_nkw=Mifare+RC522+Card+Read+Antenna+RF+Module+RFID+Reader+IC+Card+Proximity+Module&_itemId=221393382348&_trksid=p2047675.m4099 If this is not possible, which is compatible with the RFID reader RFID components ...

Hello!

I use the Microchip MCP3421 ADC.
Very good, and cheap.
Thermocouples can be measured directly.
http://www.microchip.com/wwwproducts/De ... e=en520011

Hello! I tried the attached SPI slave program. I get the following error message. Error: Unresolved external function:'FC_CAL_SPI_Slave_RxByte_1(void)' Error: Unresolved external symbol, function:FC_CAL_SPI_Slave_RxByte_1 failure C:\Program Files\Flowcode 6\compilers\pic\boostc\boostlink_picmicro.ex...