Search found 514 matches

by Jordy101091
Fri Mar 14, 2014 3:07 pm
Forum: Flowcode V6
Topic: Visi Genie component??
Replies: 26
Views: 14720

Re: Visi Genie component??

First Thing that I notice is that the clock source for timer0 is derivate from T0CKI this should be the internal clock.

this is really the only thing I can find, adjust this and try again, if it doesn't work let me know.

Regards Jordy
by Jordy101091
Fri Mar 14, 2014 11:44 am
Forum: Feature requests
Topic: MultiCore Microcontrollers
Replies: 2
Views: 3344

MultiCore Microcontrollers

Hi all, Some times I thinking to start learning to develop with FPGA's but ones you go deeper into the field of these devices the more challenging it gets. And its likely that flowcode is going to support FPGAs in a few years time. Thats makes me wonder, because I have seen what FPGA's can do, and i...
by Jordy101091
Thu Mar 13, 2014 3:24 pm
Forum: Flowcode V6
Topic: Visi Genie component??
Replies: 26
Views: 14720

Re: Visi Genie component??

Please attach your Flowcode program and VISI files.
Maybe I can find the problem.

Regards Jordy
by Jordy101091
Thu Mar 13, 2014 9:50 am
Forum: Flowcode V6
Topic: Visi Genie component??
Replies: 26
Views: 14720

Re: Visi Genie component??

Well, The GLCD component EB076 is different from the ViSi Component. Its not the same thing. As you are saying that you would like to use all the vidi functions, you need to dump the GLCD Component for the EB076. What you need to do is, If you havent done so. Download the 4D Workshop software from 4...
by Jordy101091
Wed Mar 12, 2014 9:53 pm
Forum: Flowcode V6
Topic: Visi Genie component??
Replies: 26
Views: 14720

Re: Visi Genie component??

Hi tech, Maybe you can take a moment, and re-write your question because I don't understand what the problem is. The display is not working, but thats a very general description :wink:. If you can explain better, maybe you can tell me what you have tried, or want to try. I have worked a lot with the...
by Jordy101091
Thu Mar 06, 2014 9:45 pm
Forum: User Components
Topic: Variable Power Supply
Replies: 6
Views: 9091

Re: Variable Power Supply

Hi Jordy, Looks good , that has just give me the inspiration to get my power supply finished that is on the side collecting dust as I write this :( need to get my finger out and carry on watching those V6 you tube tutorials :) Can I ask does yours have output current limit ? how did you sort that o...
by Jordy101091
Thu Mar 06, 2014 8:15 pm
Forum: User Components
Topic: Variable Power Supply
Replies: 6
Views: 9091

Re: Variable Power Supply

Hi John,

I still need to make a video, on how to operate the unit.
So hang on, it will be released soon (I hope).
Currently Im looking for a job, and that takes a lot of my time.

Regards Jordy
by Jordy101091
Thu Mar 06, 2014 5:43 pm
Forum: User Components
Topic: Variable Power Supply
Replies: 6
Views: 9091

Variable Power Supply

Hi everyone, I want to let you all know, that I have made a variable power supply with the flowcode software. With this topic I want to share my experience with designing, building and testing this power supply. Matrix Variable Supply Blog Post I will be making Blog post about this project, the firs...
by Jordy101091
Wed Mar 05, 2014 7:48 pm
Forum: Flowcode V6
Topic: SAE j1939
Replies: 3
Views: 2470

Re: SAE j1939

Ok georgp, First one thing I want to say is, I think you did not search hard enough to get the information you are after. If you took the extra bit of effort, and you searched in google for "J1939 Message Format" there is a lot of information available to, at least get you started. You may see this ...
by Jordy101091
Wed Mar 05, 2014 7:26 pm
Forum: Flowcode V6
Topic: SAE j1939
Replies: 3
Views: 2470

Re: SAE j1939

Hi georgp, Im not that experienced with CAN BUS let alone SAE J1939. But to learn something to, it will be my pleasure to help you as for as I can. this is from another (related) post on the forum Tell us more what you want to do with the SAE J1939 standard. I know that the SAE J1939 protocol is use...
by Jordy101091
Tue Mar 04, 2014 5:00 pm
Forum: Flowcode V6
Topic: FAT always gives 255 (no card?)
Replies: 14
Views: 7975

Re: FAT always gives 255 (no card?)

If you want I can have look at your layout file.
You can send this to me via PM.

Regards Jordy
by Jordy101091
Tue Mar 04, 2014 3:46 pm
Forum: Flowcode V6
Topic: FAT always gives 255 (no card?)
Replies: 14
Views: 7975

Re: FAT always gives 255 (no card?)

There is no difference in interfacing a SD or MicroSD card, the only differences are the dimensions of the card.
So to answer your question, If everything is working you should be able to interface microSD aswel as a standard SD Card.

Regards Jordy
by Jordy101091
Tue Mar 04, 2014 10:55 am
Forum: Flowcode V6
Topic: FAT always gives 255 (no card?)
Replies: 14
Views: 7975

Re: FAT always gives 255 (no card?)

I think, don't quote me on this.

Flowcode handles the port directions for you, so as for as I know you don't have to do anything about this.
As I have said before, im not 100% sure about this, the best person to ask is one of the MM Team.

Regards Jordy
by Jordy101091
Mon Mar 03, 2014 11:24 pm
Forum: Flowcode V6
Topic: FAT always gives 255 (no card?)
Replies: 14
Views: 7975

Re: FAT always gives 255 (no card?)

Hi mikn, First of all, when you want to upload a Flowcode file please attach this to you post instead of uploading this to a secondary site. The reason why im saying this is because the site you uploaded to, gives me a crap load of ads. Anyway, I had a look to you Flowcode file. I must say I cannot ...
by Jordy101091
Sun Mar 02, 2014 7:56 pm
Forum: Flowcode V6
Topic: CAN BUS SAE j1939
Replies: 1
Views: 2349

Re: CAN BUS SAE j1939

Hi Afsal, Tell us more what you want to do with the SAE J1939 standard. I know that the SAE J1939 protocol is used in the automotive industry, for communication diagnostics. If Im correct this this standard is mostly used in the USA. Also does Fleet Management Systems Interface (FMS) say anything to...
by Jordy101091
Sun Mar 02, 2014 7:44 pm
Forum: Flowcode V6
Topic: LED Matrix
Replies: 4
Views: 2666

Re: LED Matrix

Can you upload you Flowcode program so I can have a look ad it.
Or send me PM if you don't want it to go public
by Jordy101091
Sun Mar 02, 2014 7:39 pm
Forum: Flowcode V6
Topic: FloatToString function problem
Replies: 4
Views: 3376

Re: FloatToString function problem

There is something wrong with the FloatToString function. When you are sending 24.8 "float to string converted" then in the console windows you can see that its sending the number 24.79 with is not correct. To overcome this issue you while need to add 0.01 to 24.8 to send/receive 24.8 which is not t...
by Jordy101091
Sun Mar 02, 2014 4:18 pm
Forum: Flowcode V6
Topic: FloatToString function problem
Replies: 4
Views: 3376

Re: FloatToString function problem

Please can you post your program so I can have a look ad it.

regards jordy
by Jordy101091
Sat Mar 01, 2014 11:59 pm
Forum: General Programming
Topic: help for a heater automation control
Replies: 4
Views: 3839

Re: help for a heater automation control

If you teacher doesn't even know what hysteresis is then, :lol: But hé who needs a teacher if you have the good old books and the matix forum :wink:. I can tell you one thing and that is I have never studied electronics, all the things I have learned is basically self-taught, by reading books from m...
by Jordy101091
Sat Mar 01, 2014 11:48 pm
Forum: User Components
Topic: Advanced ADC Component
Replies: 2
Views: 8384

Advanced ADC Component

Advanced ADC Component v1.0 Info: Some times you need to measure stuff with you on-board ADC. Most of the time this ADC has a 10bit resolution, for most of the project / application having a 10bit resolution is more then enough. Howe ever there are some cases that you have considered having a devic...
by Jordy101091
Thu Feb 27, 2014 10:17 pm
Forum: General Programming
Topic: help for a heater automation control
Replies: 4
Views: 3839

Re: help for a heater automation control

Hi chuck51, I want to help you, with any troubles you encounter. But since this is a school project, you will need to do all the work, I and all other members of the forum are here to assist you. So before I start to think with you, you would need to do the following. First you need to look search t...
by Jordy101091
Wed Feb 26, 2014 8:28 pm
Forum: Freelance Embedded Engineers
Topic: [Help needed] Flowcode Keypad
Replies: 4
Views: 16972

Re: [Help needed] Flowcode Keypad

Well it is quite easy. I will try to explain to you how it works. Take the datasheet from the eblock with the Keypad. http://www.matrixmultimedia.com/resources/files/datasheets/EB014-30-1.pdf its all about scanning Colum's and Rows. If you apply 5V on R1:A and you press key 1 then you know that what...
by Jordy101091
Tue Feb 25, 2014 7:51 pm
Forum: Flowcode V6
Topic: KS0108 GLCD Issues
Replies: 3
Views: 2453

Re: KS0108 GLCD Issues

maybe a some what strange question but, ar you convinced that you connections are 100% ok, and correspond with the connections you have set in the software. maybe you have connected your databus lines backwards. regards jordy, PS. I also use a GLCD 128x64 KS0108 display and that display is working n...
by Jordy101091
Mon Feb 24, 2014 1:20 pm
Forum: Flowcode V6
Topic: GLCD 128 x 128
Replies: 5
Views: 3706

Re: GLCD 128 x 128

Hi Tony,

How good are you in C code.
Because I have made a component for the T6963C in flowcode but I cannot get it to work properly.
Maybe if you have some knowledge about C code you could help me get it to work.

Regards Jordy
by Jordy101091
Sun Feb 23, 2014 8:20 pm
Forum: Flowcode V6
Topic: GLCD 128 x 128
Replies: 5
Views: 3706

Re: GLCD 128 x 128

depends on what kind of controller IC this display has.