Making a thermostaat with the buggy

For Formula Flowcode Micromouse users to discuss projects, flowcharts, and any other issues related to the Formula Flowcode Micromouse.

Moderator: Benj

Post Reply
Dieter
Posts: 1
Joined: Mon Feb 22, 2010 7:00 pm
Contact:

Making a thermostaat with the buggy

Post by Dieter »

I wondered whether it was possible to make a termostaat with the Formula Flowcode buggy.
Here I would connect a temperature sensor (DS1820), use an LCD display for monitoring the temperature and use a relay to switch a heat component.

Something like this http://www.youtube.com/watch?v=r_D0ORrx ... re=related buth then with the formula flowcode buggy

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Making a thermostaat with the buggy

Post by Benj »

Hello,

This is technically possible but you may not be able to use the buggy as a robot as you would have to use some of the I/O lines in your application.

Post Reply