line follower in FC6

For Formula Flowcode Micromouse users to discuss projects, flowcharts, and any other issues related to the Formula Flowcode Micromouse.

Moderator: Benj

Post Reply
DELAK_ALED
Posts: 23
Joined: Sat Jun 21, 2014 11:04 am
Has thanked: 5 times
Been thanked: 2 times
Contact:

line follower in FC6

Post by DELAK_ALED »

Hello,
In fowcode4, I made a line followcer it works fine.
But when I make the same follower in FC6 on the same buggy, the buggy leaves repeatedly the black line.
How can I improve the FC6 program?
Attachments
FC4.fcf
(8 KiB) Downloaded 697 times
fc6.fcfx
(5.49 KiB) Downloaded 613 times

DELAK_ALED
Posts: 23
Joined: Sat Jun 21, 2014 11:04 am
Has thanked: 5 times
Been thanked: 2 times
Contact:

Re: line follower in FC6

Post by DELAK_ALED »

I made now a line follower in FC6 without component macro's. It works verry well.
Is then the conclusion that the component macro's of the buggy don't work verry well in FC6 (and work verry well in FC4) a good conclusion? Or are there other reasons why the follower don't work with component macro's in FC6
Attachments
follower.fcfx
(5.11 KiB) Downloaded 657 times

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: line follower in FC6

Post by Benj »

Hello,

That's strange the component code in v4 and v6 should be pretty much the same.

Have you seen this Formula Flowcode line following example written in v6?
http://www.matrixtsl.com/wiki/index.php ... ec2007b406

Post Reply