Hi All
Can UART frame errors be read using flowcode ? If yes then how do i do it.
Many Thanks
Frame error
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Frame error
Hello
Are you using Flowcode V3 or V4? V3 cannot without modifying the C code but V4 can.
Are you using Flowcode V3 or V4? V3 cannot without modifying the C code but V4 can.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 4
- Joined: Mon Aug 24, 2009 11:18 am
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Frame error
I cannot solve any v4 problems outside of the V4 forum topic. Please can you post your request in there.
If you currently cannot post into the v4 Forum topic then please follow the process documented here,
http://www.matrixmultimedia.com/mmforum ... =29&t=6524
If you currently cannot post into the v4 Forum topic then please follow the process documented here,
http://www.matrixmultimedia.com/mmforum ... =29&t=6524
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel