C for ARM E-blocks starter kit ?

For E-blocks user to discuss using E-blocks and programming for them.

Moderators: Benj, Mods

Post Reply
Z.K.
Posts: 6
Joined: Wed Mar 13, 2013 8:57 am
Has thanked: 1 time
Been thanked: 1 time
Contact:

C for ARM E-blocks starter kit ?

Post by Z.K. »

I just bought the C for ARM E-blocks starter kit and I have a couple of questions? For one in the resources on the web page, it lists EB355 E-Blocks User guide, there is no such document and even a search returns unknown document. The same for the EB749 baseboard and daughter board document. I would really like to get these documents. I found a similar baseboard on your website, but it is labeled EB185 though it looks exactly like the EB749.

The next question I have is about the power supply that is shipped with this kit. The board says 6-9v, but the supply is set for 12V. There is no documentation I can find that says what to set it to though I am assuming I can set it for 6V, 7.5V, or 9V and it should work. It also looks like it work just with the USB cable, but again there is no documentation on this.

A setup guide would be nice.

:?:

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: C for ARM E-blocks starter kit ?

Post by Benj »

Hello,

EB355 - http://www.matrixmultimedia.com/datashe ... 0guide.pdf

EB185 / EB749 - http://www.matrixmultimedia.com/product.php?Prod=EB185

Setting the PSU to 9V will be fine though 12V will also work. The EB031 datasheet contains details about the board such as power requirements.

Z.K.
Posts: 6
Joined: Wed Mar 13, 2013 8:57 am
Has thanked: 1 time
Been thanked: 1 time
Contact:

Re: C for ARM E-blocks starter kit ?

Post by Z.K. »

Benj wrote:Hello,

EB355 - http://www.matrixmultimedia.com/datashe ... 0guide.pdf

EB185 / EB749 - http://www.matrixmultimedia.com/product.php?Prod=EB185

Setting the PSU to 9V will be fine though 12V will also work. The EB031 datasheet contains details about the board such as power requirements.
Thanks, just what I was looking for.

:)

Post Reply