Hello everybody:
1
I have inserted my new MicroChip PIC16F877A in my new Multiprogrammer Board and when I tried to test the board, the PPP V3 "Autodetect Chip" says the PIC micro is "F1674"¡¡
I mounted other new PICmicro in other Multiprogrammer and the same respond¡¡¡
Multiprogrammer Board, EB-006-00-8
J11 => PSU
XTAL + SLOW Mode
J18/J19 => OSC
I'm very nervious...
Thanks you very much
Regards
PPP V3 detects incorrect PIC Micro
-
- Posts: 59
- Joined: Thu Aug 23, 2012 10:37 am
- Has thanked: 14 times
- Been thanked: 3 times
- Contact:
-
- Posts: 59
- Joined: Thu Aug 23, 2012 10:37 am
- Has thanked: 14 times
- Been thanked: 3 times
- Contact:
Re: PPP V3 detects incorrect PIC Micro
Hello everybody:
Please, if anybody knows about this issue, share with me.
Thanks you very much.
Please, if anybody knows about this issue, share with me.
Thanks you very much.
Carmen Garcia
-
- Posts: 1314
- Joined: Sun Jan 15, 2012 3:15 pm
- Has thanked: 474 times
- Been thanked: 458 times
- Contact:
Re: PPP V3 detects incorrect PIC Micro
Hi Carmen
a few things to check have you removed the pic that comes with the matrix board(can only prog one chip not two or more)
If your using win8 disable driver signing reinstall ppp run as administrator
Regasrds
Dazz
a few things to check have you removed the pic that comes with the matrix board(can only prog one chip not two or more)
If your using win8 disable driver signing reinstall ppp run as administrator
Regasrds
Dazz
To sign up to the V5 forum follow this link http://www.matrixmultimedia.com/forum_upgrades.php
-
- Posts: 59
- Joined: Thu Aug 23, 2012 10:37 am
- Has thanked: 14 times
- Been thanked: 3 times
- Contact:
Re: PPP V3 detects incorrect PIC Micro
Thank you very much Dazz for the reply.
The board haven't a PIC, this comes apart from the board, and this is the unique PIC that I have.
My windows is Win 7 Ultimate.
I don't know disable driver signing....Please, could you indicate me how to?
Thanks you very much Dazz
Best Regards
The board haven't a PIC, this comes apart from the board, and this is the unique PIC that I have.
My windows is Win 7 Ultimate.
I don't know disable driver signing....Please, could you indicate me how to?
Thanks you very much Dazz
Best Regards
Carmen Garcia
-
- Posts: 1314
- Joined: Sun Jan 15, 2012 3:15 pm
- Has thanked: 474 times
- Been thanked: 458 times
- Contact:
Re: PPP V3 detects incorrect PIC Micro
Hi Carmen
It's only win 8 that needs disabling win 7 should be fine,make sure no e blocks are plugged into the programmer and try again, when you plug the board in does it show in device manager, if it does try reinstalling the software and reboot pc
Regards
Dazz
It's only win 8 that needs disabling win 7 should be fine,make sure no e blocks are plugged into the programmer and try again, when you plug the board in does it show in device manager, if it does try reinstalling the software and reboot pc
Regards
Dazz
To sign up to the V5 forum follow this link http://www.matrixmultimedia.com/forum_upgrades.php