EB066-00-4 Test Procedure

For E-blocks user to discuss using E-blocks and programming for them.

Moderators: Benj, Mods

Post Reply
JackG
Posts: 2
Joined: Thu Apr 05, 2018 4:49 pm
Contact:

EB066-00-4 Test Procedure

Post by JackG »

Hi,

I have recently purchased EB006-00-4 to start a simple project of sending an SMS.

Current setup.
EB-006-00-6 Multiprogrammer
EB066-00-4 GSM Board (Port C)
LCD Display (Port B)
Pre paid EE Sim card

When I run the current test procedure (http://www.matrixtsl.com/webshop/e-bloc ... board.html) I get the initial sending message, then nothing.
Have I done something wrong? Or is my board not working?

Cheers,
Jack

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: EB066-00-4 Test Procedure

Post by Benj »

Hi Jack,

Are you using Flowcode? If so then what version and I'll try and generate you a more specific and up to date example to play with. Also what PIC device is on your EB006 board?

It's doubtful the board has a problem as each one is tested at the factory before dispatch.

JackG
Posts: 2
Joined: Thu Apr 05, 2018 4:49 pm
Contact:

Re: EB066-00-4 Test Procedure

Post by JackG »

Hi,

PIC in use is: pic16f877A

And yes I can use flowcode if needed.

Thanks

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: EB066-00-4 Test Procedure

Post by Benj »

Hello,

Here are some Flowcode programs you can try. Let us know how you get on.
GSM_Test.fcfx
(19.72 KiB) Downloaded 219 times
GSM_DialOut.fcfx
(19.28 KiB) Downloaded 214 times

Post Reply