BL0032 Anometer

For E-blocks user to discuss using E-blocks and programming for them.

Moderators: Benj, Mods

Post Reply
Monie Jacobsen
Posts: 484
Joined: Mon Jul 30, 2012 3:39 pm
Has thanked: 17 times
Been thanked: 46 times
Contact:

BL0032 Anometer

Post by Monie Jacobsen »

Hi everyone
Does anyone here see why the BL0032 Anemometer (Windspeed) is not working.
Do you have a suggestion for codes?
Please see attached codes:
BL0032_Anometer.fcfx
(20.47 KiB) Downloaded 344 times
Best Regard
Monie

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: BL0032 Anometer

Post by Benj »

Hi Monie,

What anometer are you using and can you explain more about what isn't working for you?

Monie Jacobsen
Posts: 484
Joined: Mon Jul 30, 2012 3:39 pm
Has thanked: 17 times
Been thanked: 46 times
Contact:

Re: BL0032 Anometer

Post by Monie Jacobsen »

Hi Benj
With BL0032 - 16-Bit dsPIC I try to use an anemometer.
Anemometer type: https://manualzz.com/doc/9301349/anemom ... -type-i...

Example of Anemometer using IC PIC16F1937
Anemometer_PIC16F1937.fcfx
(16.93 KiB) Downloaded 342 times
Best Regard
Monie

Monie Jacobsen
Posts: 484
Joined: Mon Jul 30, 2012 3:39 pm
Has thanked: 17 times
Been thanked: 46 times
Contact:

Re: BL0032 Anometer

Post by Monie Jacobsen »

Hi Benj

Have tried a lot to be able to read a digital input with BL0032 with no luck
Do you have a suggestion?
Attachment:
BL0032_PulsIn.fcfx
(8.95 KiB) Downloaded 341 times
Best Regard
Monie

Monie Jacobsen
Posts: 484
Joined: Mon Jul 30, 2012 3:39 pm
Has thanked: 17 times
Been thanked: 46 times
Contact:

Re: BL0032 Anometer

Post by Monie Jacobsen »

Hi everyone
Have also tried this version.
Med still can't read a frequency
Attachment:
READ FREQUENCY_BL0032.fcfx
(11.51 KiB) Downloaded 356 times
Do you have a code suggestion so that it becomes possible to read a sequence?
Best Regard
Monie

Post Reply