LCD eb-005

[D.Bouchier]

Hi,

My lcd screen of my EB-005 is broken and i wanted to replace it, but i cant desolder the original lcd, i used a 450 degrees hot rod and a suction pen, some minutes later, the only thing that has gotten desoldered are bits of my skin and part of my patience.

How on earth do i get these things of?

Thanks in advance

[Benj]

Hello,

Yes the LCDs are a right pain to get off, you have my sympathy. I have had success before using a dremel rotary tool and drilling the thing off the PCB.

May be easier simply to buy another E-block or to simply solder up a 9-way D-type and use wire to connect up your new LCD. Veroboard would also do the job nicely.

[Dan81]

Hello D

If you use a desoldering iron (weller WR 3000M for ex) , it's very easy.
I've replaced on six Eblock, the 2x16 LCD by 4x20 without problem.

Daniel