I have a question about a zigbee design. I realise the firmware for the coordinator & end modules is inside the Zigbee module itself, & I have already been directly to the XBEE site for the public domain stuff, but I wanted to make sure that the firware I use is completely compatible with the Flowcode software code. Can you supply or clarify what firmware you use for both the coordinator & end modules please? Also, do I have to buy some sort of programmer to upload the firmware?
Regards
TP
Zigbee Design
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Zigbee Design
Hello,
You should not have to change the firmware on the modules unless you are having real problems getting them to work. To date I don't know of any firmware revisions that will not work with the Flowcode component.
The firmware can be read / written using a TTL serial connection or one of the Xbee development boards from Digi alongside the X-CTU software.
I believe we use firmware ZNET 2.5 version 1047 (Coord) and 1247 (Router) but this may have been updated to the latest version.
You should not have to change the firmware on the modules unless you are having real problems getting them to work. To date I don't know of any firmware revisions that will not work with the Flowcode component.
The firmware can be read / written using a TTL serial connection or one of the Xbee development boards from Digi alongside the X-CTU software.
I believe we use firmware ZNET 2.5 version 1047 (Coord) and 1247 (Router) but this may have been updated to the latest version.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Zigbee Design
From: Tony Perry
Hi Benj,
I have another question about a Zigbee design. Based on the fact that peer to peer & 'sleep' experiments seem to have been developed for the Zigbee 'bundle', can I make the assumption that the design used by Matrix Multimedia is in fact a Digimesh product? Is that correct?
Regards
Tony Perry
NHIUK1996@Aol.com
------------------------------------
Hi Benj,
I have another question about a Zigbee design. Based on the fact that peer to peer & 'sleep' experiments seem to have been developed for the Zigbee 'bundle', can I make the assumption that the design used by Matrix Multimedia is in fact a Digimesh product? Is that correct?
Regards
Tony Perry
NHIUK1996@Aol.com
------------------------------------
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Zigbee Design
Hello,
No we use the Zigbee modules and not the DigiMesh modules, the product code for the modules on the E-block is XB24-BCIT-004-ND.
No we use the Zigbee modules and not the DigiMesh modules, the product code for the modules on the E-block is XB24-BCIT-004-ND.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Zigbee Design
From: Tony Perry
Hi ben,
still a bit confused. sorry. The only parts I can find on the digi website do not match up entirely with the part number you gave me. Here is the link & the numbers I have found. The search engine found nothing on the number you gave me. Is it one of these two?
http://www.digi.com/products/wireless-w ... jsp#models
XB24-Z7CIT-004 XBee ZB low power ZigBee module w/ chip antenna
XB24-Z7WIT-004 XBee ZB low power ZigBee module w/ integrated wire antenna
Hi ben,
still a bit confused. sorry. The only parts I can find on the digi website do not match up entirely with the part number you gave me. Here is the link & the numbers I have found. The search engine found nothing on the number you gave me. Is it one of these two?
http://www.digi.com/products/wireless-w ... jsp#models
XB24-Z7CIT-004 XBee ZB low power ZigBee module w/ chip antenna
XB24-Z7WIT-004 XBee ZB low power ZigBee module w/ integrated wire antenna
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Zigbee Design
Hello,
These modules should be fully compatible.
XB24-Z7CIT-004 XBee ZB low power ZigBee module w/ chip antenna
These modules should be fully compatible.
XB24-Z7CIT-004 XBee ZB low power ZigBee module w/ chip antenna
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Zigbee Design
from: Tony Perry
Hi Benj,
another quick question:-
Do Matrix have access to any write-up's or articles, concerning the use of multiple Zigbee coordinator boards used in close proximity?
Regards
TP
Hi Benj,
another quick question:-
Do Matrix have access to any write-up's or articles, concerning the use of multiple Zigbee coordinator boards used in close proximity?
Regards
TP
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Zigbee Design
Hello,
No sorry we do not. However each Zigbee network uses one of many RF channels. If you pre-assign the RF channels then you shouldn't have any problems connecting an end point to the correct coordinator.
No sorry we do not. However each Zigbee network uses one of many RF channels. If you pre-assign the RF channels then you shouldn't have any problems connecting an end point to the correct coordinator.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Re: Zigbee Design
From: Tony Perry
Hi Benj,
thanks for that answer. Is any of that information referenced in the Zigbee training course CD at all?
Regards
TP
---------------------------------
Hi Benj,
thanks for that answer. Is any of that information referenced in the Zigbee training course CD at all?
Regards
TP
---------------------------------
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Zigbee Design
Hello,
Yes the RF channels are mentioned in the Zigbee solution guide and the Zigbee component help file.
Yes the RF channels are mentioned in the Zigbee solution guide and the Zigbee component help file.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel