Page 1 of 1
ds1307
Posted: Tue Jul 06, 2010 12:45 am
by stevel
on the ds1307 datasheet it says you have to clear bit 7 from 1 to 0 how do i do this
Re: ds1307
Posted: Tue Jul 06, 2010 5:46 am
by medelec35
Hello stevel
For clearing and setting bits, take a look here:
http://www.matrixmultimedia.com/mmforum ... 85&p=13370
Re: ds1307
Posted: Tue Jul 06, 2010 6:34 am
by Dan81
Hello Stevel
A little example (not tested) to clear the bit Clock Halt.
If you want to use DS1307 :
http://www.matrixmultimedia.com/mmforum ... 307#p18528
Daniel