Hello,
I noticed that in Flowcode you can sent control commands directly to the LCD, e.g. 'cursor on' (hex 15). But that is not shown of the simulator display, right? Are there any commands that *are* simulated and can be verified during a sim?
Jan Didden
HD44780 LCD Command Set emulation?
- Steve
- Matrix Staff
- Posts: 3418
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: HD44780 LCD Command Set emulation?
Only the commands that are accessed via their own functions are currently simulated (e.g. MoveCursor and Clear).
- Steve
- Matrix Staff
- Posts: 3418
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: HD44780 LCD Command Set emulation?
I think we'll implement a load of others (inc the custom characters described in another post), but not immediately. We are currently working on a big upgrade of Flowcode (to v4).
-
- Posts: 258
- Joined: Wed Nov 29, 2006 6:32 pm
- Location: Finland
- Has thanked: 7 times
- Been thanked: 36 times
- Contact:
Re: HD44780 LCD Command Set emulation?
Steve,any ideas when the flowcode 4 will arrive?
And what new it will bring?
And what new it will bring?
- Steve
- Matrix Staff
- Posts: 3418
- Joined: Tue Jan 03, 2006 3:59 pm
- Has thanked: 114 times
- Been thanked: 422 times
- Contact:
Re: HD44780 LCD Command Set emulation?
It's far too early to give a definite date, but we're aiming for the end of 2008.
As for the new features, I don't want to give away too much at this stage...
As for the new features, I don't want to give away too much at this stage...
Re: HD44780 LCD Command Set emulation?
A date for the Flowcode version 4 ??? , I have the same problem with the driver HD44780 for LCD mode 4-bit !