lcd

Forum for problems or queries regarding other Flowcode Components. Eg LEDs, Switches, LCD, Gfx LCD etc

Moderators: Benj, Mods

Post Reply
stevel
Posts: 19
Joined: Sat Sep 05, 2009 2:18 pm
Contact:

lcd

Post by stevel »

I have flowcode 3 i dont know how to display true voltage on lcd / All i can get is the adc value ie 255 how do i change it to display 12 volts for example can anybody help me please

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: lcd

Post by Benj »

Hello

Please refer to this post.

http://www.matrixmultimedia.com/mmforum ... =22&t=6652

Flowcode 4 does the functionality you require by default, in V3 you are better off creating a look up table.

There is an example of how to do this in the articles section of the forum.

Post Reply