Quad-Encoder!

Tips, Tricks and methods for programming, learn ways of making your programming life easier, and share your knowledge with others.

Moderators: Benj, Mods

Post Reply
jgu1
Posts: 1333
Joined: Tue Oct 06, 2009 9:39 am
Has thanked: 1135 times
Been thanked: 299 times
Contact:

Quad-Encoder!

Post by jgu1 »

Hi all!


I found one of these Bourns encoder: https://www.mouser.dk/ProductDetail/Bou ... 5AqDqgrA==

I made a test in FC8 with a couble of exable from Wiki/helpmenu and will share my test with you.

The midle pin on the Encoder, I connect to 5V, the two other I added 2 pc. 1K resistor and to ground. From both output on the outer pin I connect them to the input on the Arduino.
I have change the display and I use an Anduino istead of a Pic.

Amazing, the Quad component work so perfect, so nice. :wink:

Br Jorgen.
Attachments
Quad_Encoder_IOCMega.fcfx
(12.46 KiB) Downloaded 290 times
Quad_Encoder_Mega.fcfx
(10.54 KiB) Downloaded 283 times

Post Reply