Quad-Encoder!
Posted: Sat May 18, 2019 6:57 pm
Hi all!
I found one of these Bourns encoder: https://www.mouser.dk/ProductDetail/Bou ... 5AqDqgrA==
I made a test in FC8 with a couble of exable from Wiki/helpmenu and will share my test with you.
The midle pin on the Encoder, I connect to 5V, the two other I added 2 pc. 1K resistor and to ground. From both output on the outer pin I connect them to the input on the Arduino.
I have change the display and I use an Anduino istead of a Pic.
Amazing, the Quad component work so perfect, so nice.
Br Jorgen.
I found one of these Bourns encoder: https://www.mouser.dk/ProductDetail/Bou ... 5AqDqgrA==
I made a test in FC8 with a couble of exable from Wiki/helpmenu and will share my test with you.
The midle pin on the Encoder, I connect to 5V, the two other I added 2 pc. 1K resistor and to ground. From both output on the outer pin I connect them to the input on the Arduino.
I have change the display and I use an Anduino istead of a Pic.
Amazing, the Quad component work so perfect, so nice.
Br Jorgen.