multi channel anologue

Tips, Tricks and methods for programming, learn ways of making your programming life easier, and share your knowledge with others.

Moderators: Benj, Mods

Post Reply
siliconchip
Posts: 392
Joined: Wed Jan 05, 2011 11:24 am
Has thanked: 101 times
Been thanked: 24 times
Contact:

multi channel anologue

Post by siliconchip »

hi all,
apology's if this is posted in the wrong section, im aiming to use 3 analogue inputs in turn to read data but want to connect all three to the same output in turn whats the easiest way to connect all three inputs to a single output without interfering with each other,i had thought initially of using diodes but the 0.7v diode drop will interfere with the adc reading

regards bob

User avatar
Steve001
Valued Contributor
Valued Contributor
Posts: 1189
Joined: Wed Dec 31, 2008 3:37 pm
Has thanked: 460 times
Been thanked: 523 times
Contact:

Re: multi channel anologue

Post by Steve001 »

Hi Bob

How about an analougue multiplexer ?

Have used the ADG609 before

https://www.analog.com/media/en/technic ... 08_609.pdf

Steve
Success always occurs in private and failure in full view.

Post Reply