Dear,
I have display the value of the ADC on the miac module.
In the flowchart simulation is the maximum value 255.
I have loaded the software in the miac module and there is the maximum value of ADC = 127
See attachment Oefening5.fcfx
What is it wrong?
Best regards
Nazaire Verrue
Miac display ADC
-
Nazaire VERRUE
- Posts: 43
- Joined: Tue Nov 23, 2010 4:46 pm
- Been thanked: 3 times
- Contact:
-
medelec35
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Miac display ADC
Hi Nazaire,
Can't answer that one.
But I can confirm that if you use InputANALOG from miac component your get a more realistic value.
E.g 10.6V i/p will display 210
Martin
Can't answer that one.
But I can confirm that if you use InputANALOG from miac component your get a more realistic value.
E.g 10.6V i/p will display 210
Martin
Martin
-
Nazaire VERRUE
- Posts: 43
- Joined: Tue Nov 23, 2010 4:46 pm
- Been thanked: 3 times
- Contact:
Re: Miac display ADC
Hi Martin
In flowcode 5 it works correct.
What is it wrong in flowcode 6?
Best regards
Nazaire
In flowcode 5 it works correct.
What is it wrong in flowcode 6?
Best regards
Nazaire