Dear,
In attachment there are two files for two miac modules
I have made a standard can connection with two Miac modules.
The flowchart simulation work perfect, but the software will not load in the modules.
By compile to C there are errors.
What is here wrong?
Best regards
Nazaire
Miac CAN communication standard
-
Nazaire VERRUE
- Posts: 43
- Joined: Tue Nov 23, 2010 4:46 pm
- Been thanked: 3 times
- Contact:
Miac CAN communication standard
- Attachments
-
- Oefening8b.fcfx
- (10.37 KiB) Downloaded 318 times
-
- Oefening8a.fcfx
- (9.34 KiB) Downloaded 297 times
-
LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: Miac CAN communication standard
Hi Nazaire,
Looks like you have found a bug in the CAN component. Updated version attached.
Regards,
Leigh
Looks like you have found a bug in the CAN component. Updated version attached.
Regards,
Leigh
- Attachments
-
- CAN.fcpx
- (21.31 KiB) Downloaded 324 times
-
Nazaire VERRUE
- Posts: 43
- Joined: Tue Nov 23, 2010 4:46 pm
- Been thanked: 3 times
- Contact:
Re: Miac CAN communication standard
Dear Leigh
The software will now download.
But now SetTxIDSimple work correct, but GetRxIDSimple will not work.
What is here wrong?
Best regards
Nazaire
The software will now download.
But now SetTxIDSimple work correct, but GetRxIDSimple will not work.
What is here wrong?
Best regards
Nazaire
-
LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: Miac CAN communication standard
Hi Nazaire,
I suggest you use SetTxIdent and GetRxIdent
Regards,
Leigh
I suggest you use SetTxIdent and GetRxIdent
Regards,
Leigh