Problem with Simulation speed for dsPIC

For MIAC users to discuss projects, applications, and any other issues related to the MIAC unit.

Moderators: Benj, Mods

Post Reply
Monie Jacobsen
Posts: 484
Joined: Mon Jul 30, 2012 3:39 pm
Has thanked: 17 times
Been thanked: 46 times
Contact:

Problem with Simulation speed for dsPIC

Post by Monie Jacobsen »

Hi LeighM

Trying to use The Flowcode simulation step and breakpoint functions!
But in Simulation speed I can only set the number "0.25" can choose others but at the start of Simulation it returns to "0.25".
Want to set simulation step to Normal and be able to save the selected number.

ProjectOptions.JPG
ProjectOptions.JPG (25.17 KiB) Viewed 127 times


Hope you can see what I'm doing wrong ;-)

Isn't there one here! That will describe how Simulation speed can be written and saved and Simulation speed startup = Normal ???????

With dsPIC (MI5809) I try to set Simulation speed to Normal, but always return to number "0.25".
Isn't there anyone who can answer here?
Best Regard
Monie

User avatar
LeighM
Matrix Staff
Posts: 2178
Joined: Tue Jan 17, 2012 10:07 am
Has thanked: 481 times
Been thanked: 699 times
Contact:

Re: Problem with Simulation speed for dsPIC

Post by LeighM »

Hi Monie,
So, if you select Normal, and click OK,
sim_speed.jpg
sim_speed.jpg (29.16 KiB) Viewed 8744 times
are you saying that the sim speed does not change to Normal, but stays at 0.25?

Monie Jacobsen
Posts: 484
Joined: Mon Jul 30, 2012 3:39 pm
Has thanked: 17 times
Been thanked: 46 times
Contact:

Re: Problem with Simulation speed for dsPIC

Post by Monie Jacobsen »

Hi LeighM

Have constantly done as you and others describe! But without luck
are you saying that the sim speed does not change to Normal, but stays at 0.25?
But stays at 0.25?
Have done what you describe
By a new simulation that starts simulation "0.25"
Even if the layout is saved as "Normal".

Please see attached test file:
MIACdsPIC-Test.fcfx
(23.01 KiB) Downloaded 258 times
Best Regard
Monie

User avatar
LeighM
Matrix Staff
Posts: 2178
Joined: Tue Jan 17, 2012 10:07 am
Has thanked: 481 times
Been thanked: 699 times
Contact:

Re: Problem with Simulation speed for dsPIC

Post by LeighM »

Strange, works for me
sim.jpg
sim.jpg (37.43 KiB) Viewed 8738 times
Are you able to move the simulation speed slider to the Normal position, and thereby set the speed that way?
(Red arrow)

Monie Jacobsen
Posts: 484
Joined: Mon Jul 30, 2012 3:39 pm
Has thanked: 17 times
Been thanked: 46 times
Contact:

Re: Problem with Simulation speed for dsPIC

Post by Monie Jacobsen »

Hi LeighM
The Strange,NOT works for me!
(you can move the simulation speed to the normal position. I do this too.)
But once the Flowcode has been restarted. After having the saved setup as you describe "simulation speed"
But stays at 0.25?
Best Regard
Monie

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Problem with Simulation speed for dsPIC

Post by Benj »

Hello Monie,

Have you changed the simulation speed in the project options? This will set the default speed for the project.

Make sure to save the project after editing the project options and then the change should also persist when reloading the project.

Monie Jacobsen
Posts: 484
Joined: Mon Jul 30, 2012 3:39 pm
Has thanked: 17 times
Been thanked: 46 times
Contact:

Re: Problem with Simulation speed for dsPIC

Post by Monie Jacobsen »

Hi LeighM
"Make sure to save the project after editing the project options and then the change should also persist when reloading the project."
I do as you describe but without success. But stays at 0.25? on startup again.
Run your Flowcode v6 on server?
Best Regard
Monie

User avatar
LeighM
Matrix Staff
Posts: 2178
Joined: Tue Jan 17, 2012 10:07 am
Has thanked: 481 times
Been thanked: 699 times
Contact:

Re: Problem with Simulation speed for dsPIC

Post by LeighM »

Run your Flowcode v6 on server?
V6? I thought you were using V8?
What do you mean by "on server"?
Is your project file stored on a network share?
If so, do you get the same issue when you store it locally?

User avatar
LeighM
Matrix Staff
Posts: 2178
Joined: Tue Jan 17, 2012 10:07 am
Has thanked: 481 times
Been thanked: 699 times
Contact:

Re: Problem with Simulation speed for dsPIC

Post by LeighM »

Also, is the OK button of the Project Options dialog visible such that you can click it to confirm and save the change?
config.jpg
config.jpg (31.72 KiB) Viewed 8724 times

Monie Jacobsen
Posts: 484
Joined: Mon Jul 30, 2012 3:39 pm
Has thanked: 17 times
Been thanked: 46 times
Contact:

Re: Problem with Simulation speed for dsPIC

Post by Monie Jacobsen »

Hi LeighM

Again tried to reinstall Flowcode v6
Has set the OK button of the Project Options dialog and save the change.
And now I can simulate the codes;-)
Best Regard
Monie

Monie Jacobsen
Posts: 484
Joined: Mon Jul 30, 2012 3:39 pm
Has thanked: 17 times
Been thanked: 46 times
Contact:

Re: Problem with Simulation speed for dsPIC

Post by Monie Jacobsen »

Hi LeighM
Thank you very much for your help.
Best Regard
Monie

Post Reply