Hi Team,
Can you please advise me on using the dsPIC MIAC RS485 should I add the 120 Ohm terminator resistor or is this already included in the Hardware.
I did not find any reference in the manual regrading the terminators
Appreciate your input
dsPIC MIAC RS485 Communication
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: dsPIC MIAC RS485 Communication
Hi,
No, there is no internal termination resistor.
Or pullup/pulldown
Regards
Leigh
No, there is no internal termination resistor.
Or pullup/pulldown
Regards
Leigh
- QMESAR
- Valued Contributor
- Posts: 1287
- Joined: Sun Oct 05, 2014 3:20 pm
- Location: Russia
- Has thanked: 384 times
- Been thanked: 614 times
- Contact:
Re: dsPIC MIAC RS485 Communication
Hi Leigh
Can you also tell me please if there is TVS diodes on the front end of the Transceiver node to protect the transceiver ,as this MIAC will run in an noisy environment.
Thanks a million
Can you also tell me please if there is TVS diodes on the front end of the Transceiver node to protect the transceiver ,as this MIAC will run in an noisy environment.
Thanks a million
https://www.flowcodexchange.com/
Regards QMESAR
Regards QMESAR
- LeighM
- Matrix Staff
- Posts: 2178
- Joined: Tue Jan 17, 2012 10:07 am
- Has thanked: 481 times
- Been thanked: 699 times
- Contact:
Re: dsPIC MIAC RS485 Communication
The transceiver is a SN65HVD10DR which has built in ESD Protection,
but external extra TVS sounds like a good idea in your application
but external extra TVS sounds like a good idea in your application
- QMESAR
- Valued Contributor
- Posts: 1287
- Joined: Sun Oct 05, 2014 3:20 pm
- Location: Russia
- Has thanked: 384 times
- Been thanked: 614 times
- Contact:
Re: dsPIC MIAC RS485 Communication
Leigh
Thanks now I know how to layout the wiring and connections the internal ESD TVS is not enough for sure
Thanks now I know how to layout the wiring and connections the internal ESD TVS is not enough for sure
https://www.flowcodexchange.com/
Regards QMESAR
Regards QMESAR