warning at compile
Posted: Mon Jan 11, 2016 3:56 pm
Hello
Dear Colleagues have a problem with compiling the program. There is a mistake but rather a warning of the possibility of error " Building CASM file
Serious Warning : Possible s stack corruption , function ' __mul_16u_16u__16 ' called by more than one asynchronous thread ( main / Task , interrupt , interrupt Low )
"
Which results in a warning . The program in emulation mode works correctly , as expected. This program is a simple timer , long time intervals up to 4 hours . It also has the ability to control via RS232 .
ostrzeżenie w trybie kompilacji
Witam
Szanowni koledzy mam problem z kompilacją programu. Występuje bład, a raczej ostrzeżenie o możliwości wystąpienia błedu: " Building CASM file
Serious Warning: Possible sw stack corruption, function '__mul_16u_16u__16' called by more than one asynchronous thread (main/Task, interrupt, interrupt low)
"
Czego wynikiem jest to ostrzeżenie. Program w trybie emulacji działa poprawnie, zgodnie z oczekiwaniem. Program ten jest bardzo prostym przekaźnikiem czasowym, z długimi interwałami czasowymi do 4h. Posiada też możliwość sterowania przez RS232.
Dear Colleagues have a problem with compiling the program. There is a mistake but rather a warning of the possibility of error " Building CASM file
Serious Warning : Possible s stack corruption , function ' __mul_16u_16u__16 ' called by more than one asynchronous thread ( main / Task , interrupt , interrupt Low )
"
Which results in a warning . The program in emulation mode works correctly , as expected. This program is a simple timer , long time intervals up to 4 hours . It also has the ability to control via RS232 .
ostrzeżenie w trybie kompilacji
Witam
Szanowni koledzy mam problem z kompilacją programu. Występuje bład, a raczej ostrzeżenie o możliwości wystąpienia błedu: " Building CASM file
Serious Warning: Possible sw stack corruption, function '__mul_16u_16u__16' called by more than one asynchronous thread (main/Task, interrupt, interrupt low)
"
Czego wynikiem jest to ostrzeżenie. Program w trybie emulacji działa poprawnie, zgodnie z oczekiwaniem. Program ten jest bardzo prostym przekaźnikiem czasowym, z długimi interwałami czasowymi do 4h. Posiada też możliwość sterowania przez RS232.