Please Help ....
Posted: Wed Nov 07, 2018 9:58 am
I have just returned to a project done a few years ago in Flowcode V4.3.6.61 only to find the compiler doesn't compile most of the time !!
It seems nothing to do with my code but with Flowcode V4 itself, as sometimes it works and sometimes it doesn't ... without changing anything !!!
I need to exit and re-start Flowcode until I get it to work ok !
I'm running WIN7 64 bit and when things go wrong I get this ....
File name: C:\Users\IAIN\Documents\Flowcodex\Octopus.c
Generated by: Flowcode v4.3.6.61
Date: Wednesday, November 07, 2018 08:55:58
Licence: Professional
Registered to: Wilkie Electronics
http://www.matrixmultimedia.com
Launching the compiler...
C:\Program Files (x86)\Matrix Multimedia\Flowcode AVR V4\Tools\MX_bats\avra.bat attiny26 "C:\Users\IAIN\DOCUME~1\Flowcodex\Octopus.elf" "C:\Users\IAIN\DOCUME~1\Flowcodex\Octopus.c" "C:\Users\IAIN\DOCUME~1\Flowcodex\Octopus.lst"
Return code = 1
Flowcode was unable to compile the flowchart's C code due to the following errors:
If your flowchart contains C code, please review this carefully. If your flowchart contains no C-code or you have thoroughly reviewed the code, contact Technical Support.
FINISHED
I realise V4 is no longer supported, but if anyone can help it would be greatly appreciated !!
Iain Wilkie
It seems nothing to do with my code but with Flowcode V4 itself, as sometimes it works and sometimes it doesn't ... without changing anything !!!
I need to exit and re-start Flowcode until I get it to work ok !
I'm running WIN7 64 bit and when things go wrong I get this ....
File name: C:\Users\IAIN\Documents\Flowcodex\Octopus.c
Generated by: Flowcode v4.3.6.61
Date: Wednesday, November 07, 2018 08:55:58
Licence: Professional
Registered to: Wilkie Electronics
http://www.matrixmultimedia.com
Launching the compiler...
C:\Program Files (x86)\Matrix Multimedia\Flowcode AVR V4\Tools\MX_bats\avra.bat attiny26 "C:\Users\IAIN\DOCUME~1\Flowcodex\Octopus.elf" "C:\Users\IAIN\DOCUME~1\Flowcodex\Octopus.c" "C:\Users\IAIN\DOCUME~1\Flowcodex\Octopus.lst"
Return code = 1
Flowcode was unable to compile the flowchart's C code due to the following errors:
If your flowchart contains C code, please review this carefully. If your flowchart contains no C-code or you have thoroughly reviewed the code, contact Technical Support.
FINISHED
I realise V4 is no longer supported, but if anyone can help it would be greatly appreciated !!
Iain Wilkie