Hi, All,
I am sure I have seen this mentioned, but can not find the post.
Will the new Flowcode V5 be able to control more the 2 PWM?
If so do we know what the max will be and will this be like the V4 version where it is only available on the Pro edition.
Thanks
Tristan
Flowcode V5 PWM
Moderator: Benj
Re: Flowcode V5 PWM
watch this.....
http://www.matrixmultimedia.com/mmforum ... 583#p28584
http://www.matrixmultimedia.com/mmforum ... 583#p28584
Benj wrote:Hello,
V5 should support all hardware PWM channels on all devices.
Well saying this there is currently a maximum of 8, I'll probably up this to 10 in the C code as I think there are some 18F devices with 10 channels.
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Flowcode V5 PWM
Confirmed, the PWM count for v5 has been upped to 10 channels as seen on some larger 18F devices. For the release only the CCP type PWMs will be supported. Other PWM types may become supported after the initial v5 release on request.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel