LED, LCD icon etc cannot move out from panel area.

Moderator: Benj

Post Reply
allpicproject
Flowcode V4 User
Posts: 36
Joined: Thu Sep 01, 2011 11:10 am
Has thanked: 17 times
Been thanked: 1 time
Contact:

LED, LCD icon etc cannot move out from panel area.

Post by allpicproject »

Hi all,

I don't know if my suggestion already here. If it's already being discussed before, then just discard mine.

For the window/panel to host/put LED,Button, RS232, LCD icon etc on it ... if I drag the LED icon out from the window/panel area then the LED cannot recovered anymore ( into the window/panel area). Except, using property window to adjust the coordinate of LED icon to coordinate that inside the window/panel area.

The suggestion is, to block the LED icon (for example) from go outside of window/panel even if the LED being drag out of it.

Hope you can get my message. ... or I need to put some pics for better understanding?

regards
Zuki.

User avatar
Steve
Matrix Staff
Posts: 3418
Joined: Tue Jan 03, 2006 3:59 pm
Has thanked: 114 times
Been thanked: 422 times
Contact:

Re: LED, LCD icon etc cannot move out from panel area.

Post by Steve »

Hi Zuki,

Thanks for your suggestion. It is something we could implement, but there are times where you might want to have 'hidden' components on your panel. Also, if the panel is resized, then objects can become off-screen. In this situation we could automatically move them so they stayed on-screen, but then the objects would become clumped together and this would be no good.

Post Reply