I want to calulate azimuth and elevation in Flowcode PICmicr

For anyone wishing to receive additional help with a project or simply looking to hire an embedded contractor we have a few contacts who would be more then willing to help.

Moderators: Benj, Mods

Post Reply
MonieJacobsen
Posts: 12
Joined: Thu Mar 11, 2010 8:10 am
Location: Danmark
Contact:

I want to calulate azimuth and elevation in Flowcode PICmicr

Post by MonieJacobsen »

I want to calulate azimuth and elevation in Flowcode PICmicro

Please will somebody help me to implant azimuth og elevation Flowcodes
into the program Flowcode V5.2 for PICmicro
Need to Calculate azimuth (East / West) and elevation (Up / Down)
I am not able to do that myself, therfore i need your help to do the calculations.

I want the codes to be installed in Matrix MIAC Eller ECIO40P

Input for longitude and latitude.
My latitude and longitude are:
Latitude = 55.121612
longitude = 10.512711

Output every 5 minutes or when needed.
az = azimuth east of north
alt = altitude above horizon

I refer to Weblink:
http://www.matrixmultimedia.com/mmforum ... 26&t=10573

http://www.matrixmultimedia.com/mmforum ... =13&t=7635

See following web-site for C codes:
http://stackoverflow.com/questions/2577 ... d-lat-long

The link here is a link with an in depth description and somebody code http://www.nrel.gov/docs/fy08osti/34302.pdf

In Flwcode PICmicro is it not rossible to use Sin, Cos directly.
See following web.
http://www.matrixmultimedia.com/mmforum ... =31&t=7447
http://www.matrixmultimedia.com/mmforum ... =13&t=7635

Are there anyone who can and will make the above mentioned for me?
Please tel me how much you want to do it?

Best regards
Monie jacobsen
Assensvej 127
5771 Stenstrup
Danmark
E-mail: solartrack@kirkebymail.dk
Best regards,
Monie

Post Reply