MX012 - Life on the PIC

Forum to discuss articles which have been published in Matrix Multimedia's article zone. If you have any comments or questions regarding the articles please post them here.

Moderators: Benj, Mods

User avatar
JonnyW
Posts: 1230
Joined: Fri Oct 29, 2010 9:13 am
Location: Matrix Multimedia Ltd
Has thanked: 64 times
Been thanked: 306 times
Contact:

MX012 - Life on the PIC

Postby JonnyW » Fri Feb 04, 2011 2:09 pm

Article: http://www.matrixmultimedia.com/resourc ... php?id=376

If you have any questions for the author or comments on the article, please post them below.
These users thanked the author JonnyW for the post:
Spanish_dude (Fri Feb 04, 2011 8:04 pm)
Rating: 5.26%
 

Spanish_dude
Posts: 594
Joined: Thu Sep 17, 2009 7:52 am
Location: Belgium
Has thanked: 63 times
Been thanked: 102 times
Contact:

Re: Life on the PIC

Postby Spanish_dude » Fri Feb 04, 2011 8:04 pm

Hi,

Interesting article, thanks !

Rgds,

Nicolas L. F.

User avatar
JonnyW
Posts: 1230
Joined: Fri Oct 29, 2010 9:13 am
Location: Matrix Multimedia Ltd
Has thanked: 64 times
Been thanked: 306 times
Contact:

Re: Life on the PIC

Postby JonnyW » Mon Feb 07, 2011 12:30 pm

Thanks! One thing I didn't do was post the Flowcode files though! Hopefully better late than never.

User avatar
JonnyW
Posts: 1230
Joined: Fri Oct 29, 2010 9:13 am
Location: Matrix Multimedia Ltd
Has thanked: 64 times
Been thanked: 306 times
Contact:

gLCD YouTube videos

Postby JonnyW » Mon Feb 14, 2011 8:21 am

Hi. If anyone is interested, there is a YouTube video of the dsPIC with a gLCD attached available. The program was built using the new Flowcode for dsPIC software.

http://www.youtube.com/watch?v=2KeUJgCvt0I

kersing
Valued Contributor
Valued Contributor
Posts: 1894
Joined: Wed Aug 27, 2008 10:31 pm
Location: Netherlands
Has thanked: 541 times
Been thanked: 1058 times
Contact:

Re: MX012 - Life on the PIC

Postby kersing » Sun May 27, 2012 4:17 pm

It might be a good idea to document the hardware setting/connections for these articles as well. The component settings for the gLCD suggest the EB058 is connected to PORT_BL, however the settings for the EB058 jumpers/patches are not clear. I 'guessed' working settings from the Astroids video (EB058 with DB9 at left side, from the top of J5: pin 2 to CS, pin 3 to SCK, pin 4 to SDI, pin 5 to SDO).
“Integrity is doing the right thing, even when no one is watching.”

― C.S. Lewis