Flowcode v5 for dsPIC registration issues .

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 5.
To post in this forum you must have a registered copy of Flowcode 5 or higher.

Moderator: Benj

Post Reply
sotos
Posts: 25
Joined: Wed Dec 12, 2007 3:14 pm
Contact:

Flowcode v5 for dsPIC registration issues .

Post by sotos »

Several years ago I had purchased the professional license for Flowcode v5 for dsPIC

It installed on a PC with Windows XP and has been working without any problems for many years .
Now due to some problem with the hard disk (dead) . I had to reinstall the Windows XP SP3 again and all my programs that I have installed on this PC .
Now when I try to activate the Flowcode v5 for dsPIC fail . :(

The key and user name that I use to activate the program is :

[b]Username: SOTIRIS MAKRIS
License Keys
Product: Flowcode V5 For dsPIC
License: Professional
Key: xxxxxx-xxxxxx-xxxxxx-xxxxxx-xxxxxx-DZX7PJ
( This is CD Key ? )

http://www.matrixmultimedia.com/flowcode.php

These are the only registration data I have, I think I'm missing the Reg Key .

Also when trying to activate the program via internet conection fail ( server not found ) .
Any solution ?
Last edited by sotos on Sun Mar 22, 2020 2:15 pm, edited 1 time in total.

User avatar
Benj
Matrix Staff
Posts: 14848
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Contact:

Re: Flowcode v5 for dsPIC registration isues .

Post by Benj »

Hello,

To reactivate the software you need to enter your CD key leaving the username field blank.

Once you have done this you should then have an email from us from your original activation. Simply enter the username and key from this original activation email.

If you cannot find the original email then please let us know and I will dig out your username and key pair for you.

sotos
Posts: 25
Joined: Wed Dec 12, 2007 3:14 pm
Contact:

Re: Flowcode v5 for dsPIC registration issues .

Post by sotos »

Thanks Benj for the quick response .
Following the instructions you have given me, but with no effect whatsoever ,
as you can see in the photos below .
when I press the Activate button, I see this the message :
( Failed to connect
The certificate authority is invalid or incorrect )

[img]C:\Users\Σωτήρης\Desktop\3[/img]

[img]C:\Users\Σωτήρης\Desktop\4[/img]

Can i send you a PM with my name and a CD Key to send me name and activation code .

Regards
Last edited by sotos on Sun Mar 22, 2020 2:16 pm, edited 1 time in total.

User avatar
Benj
Matrix Staff
Posts: 14848
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Contact:

Re: Flowcode v5 for dsPIC registration isues .

Post by Benj »

Hello,

I'm back in the office this afternoon so I'll dig out your details for you.

sotos
Posts: 25
Joined: Wed Dec 12, 2007 3:14 pm
Contact:

Re: Flowcode v5 for dsPIC registration issues .

Post by sotos »

Hi Benj

I think you forgot me ,
i understand that the situation is strange........
I had sent a PM message with my registration details .

Thanks in advance.
SOTIRIS MAKRIS
sotmakris66@gmail.com

User avatar
Benj
Matrix Staff
Posts: 14848
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Contact:

Re: Flowcode v5 for dsPIC registration issues .

Post by Benj »

Hello,

Sorry we are all currently out of the office and I didn't end up going in last week. I'm hopefully in again on Tuesday so if I can I'll have a look for you then.

Do you still have your original email from us from when you first registered? That contained your registration details and it is this information you need to complete the process.

sotos
Posts: 25
Joined: Wed Dec 12, 2007 3:14 pm
Contact:

Re: Flowcode v5 for dsPIC registration issues .

Post by sotos »

Hello Benj

Unfortunately I don't have the original email with activation details , ( it's been several years since then ) . :(
I have sent you a PM message since Mar 18, 2020 with the only activation data that I have , ( CD key , name ) .

Regards
SOTIRIS MAKRIS

User avatar
Benj
Matrix Staff
Posts: 14848
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Contact:

Re: Flowcode v5 for dsPIC registration issues .

Post by Benj »

Hello,

I've not forgotten about you, I'm popping back into the office this week so I will make sure I send you your details.

Flowcode v8 30-day trials have been reset now so this could allow you to do some work using Flowcode in the mean time.

User avatar
Benj
Matrix Staff
Posts: 14848
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Contact:

Re: Flowcode v5 for dsPIC registration issues .

Post by Benj »

I've now replied to your PM, sorry for the delay.

sotos
Posts: 25
Joined: Wed Dec 12, 2007 3:14 pm
Contact:

Re: Flowcode v5 for dsPIC registration issues .

Post by sotos »

Thanks Benj .
The activation of the Program was done without any problems. :D
I'll make sure to save the registration data better this time.
I wish you the best.

Regards

User avatar
Nico595
Posts: 82
Joined: Mon Jan 23, 2012 6:46 pm
Location: Toulouse France
Contact:

Re: Flowcode v5 for dsPIC registration issues .

Post by Nico595 »

Hello Benj,

I have the same problem with the V5 ARM Pro version.

Message from Flowcode : "Bad user"

Please fix this problem.
I give you all informations by PM.

Thank you.

User avatar
Nico595
Posts: 82
Joined: Mon Jan 23, 2012 6:46 pm
Location: Toulouse France
Contact:

Re: Flowcode v5 for dsPIC registration issues .

Post by Nico595 »

Fixed, Thank you for your quick answer Benj.

User avatar
Benj
Matrix Staff
Posts: 14848
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Contact:

Re: Flowcode v5 for dsPIC registration issues .

Post by Benj »

Thanks for letting us know, glad your up and running again :D

Post Reply