Hi guys
I'm using timer 0 in main then timer 2 in a macro but this timer dose not go to the interrupt, could you tell me if I have something wrong in my settings ? Timer 0 set to internal timer, clock speed 19660800, oscillator set on HS, watchdog timer off, power up timer on. Need to say that this is being done on a 16f877A
Regards
Xavier
Timer 2 interrupt issue
Moderator: Benj
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: Timer 2 interrupt issue
Hello Xavier,
Please can you post your program so we can have a look for you.
Please can you post your program so we can have a look for you.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Posts: 99
- Joined: Sat Mar 17, 2012 11:26 pm
- Location: South Africa
- Has thanked: 5 times
- Been thanked: 3 times
- Contact:
Re: Timer 2 interrupt issue
Sure thing Benj
All the best
Xavier
All the best
Xavier
- Attachments
-
- Digital PI detector2.fcf
- (51.39 KiB) Downloaded 370 times