Would be nice to have a pulsed input in the simulator.
Dual channel like a quadrature encoder would output, or single channel.
FC5 would only have to simulate this not write code for it.
Right now I am using a push button in place of an Ir detector so I can test out my code, but very hard to get more than a few pulses a second that way.
Pulse input
Moderator: Benj
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: Pulse input
Hi Bob,
I totally agree with you, this is one thing that's missing.
and Steve quoted:
Something in that statement we should know Steve
Meanwhile have you seen this, which may or many not be useful?:
http://www.matrixmultimedia.com/mmforum ... 088#p31661
Martin
I totally agree with you, this is one thing that's missing.
and Steve quoted:
Notice Steve said yetSteve wrote:we don't yet have stimulus on simulation inputs.
Something in that statement we should know Steve
Meanwhile have you seen this, which may or many not be useful?:
http://www.matrixmultimedia.com/mmforum ... 088#p31661
Martin
Martin