Remote Control 1 Fan & 2 light with 7 Segregate Display

Moderator: Benj

Post Reply
saidul23
Posts: 1
Joined: Sat Jul 11, 2015 4:21 pm
Contact:

Remote Control 1 Fan & 2 light with 7 Segregate Display

Post by saidul23 »

I need a flowcode which i can operate a remote control 1 Fan & 2 light with 7 Segregate Display. Any Expert Brother would like to help me Plz.

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Re: Remote Control 1 Fan & 2 light with 7 Segregate Display

Post by Benj »

Hello,

From memory the EB060 E-block is our IR board and compatible with the Flowcode RC5 component. There should be a Flowcode example and a schematic you can follow if you go to the product page.

The EB008 likewise is our 7-seg E-block and again should help to light the way on how to drive it.

Driving larger loads such as a Fan will likely require something like a NPN transistor, a base resistor and a protection diode.
NPN2.png
(73.31 KiB) Downloaded 3944 times
Have a go and then if you run into problems post your file so far and we can try to help you out.

Post Reply