Atmega2560 Port K ADC's not working Bug ?

Moderator: Benj

Post Reply
User avatar
Alan_37
Posts: 179
Joined: Sun May 01, 2016 8:36 pm
Has thanked: 51 times
Been thanked: 54 times
Contact:

Atmega2560 Port K ADC's not working Bug ?

Post by Alan_37 »

Hello .

I Know this has to be in FLOWCODE 5 but i Can't post there .

In Flowcode V5.5 Atmega2560 or Arduino2560 ADC's ON PORT K (ANA8 to ANA15 ) Do Not work
when I read the ADC it always Returns 0 .

I have try to look at the FCD file but cant find nothing .

Thanks
Last edited by Alan_37 on Sat May 14, 2016 10:59 pm, edited 1 time in total.

medelec35
Matrix Staff
Posts: 9520
Joined: Sat May 05, 2007 2:27 pm
Location: Northamptonshire, UK
Has thanked: 2585 times
Been thanked: 3815 times
Contact:

Re: BUG Atmega2560 Port K ADC's NOT WORKING

Post by medelec35 »

Hi Alan_37,
I have moved topic here since you can't post about Flowcode V5 in the V6 section.
What version of Flowcode have you got, e.g student, professional, free etc?
Martin

User avatar
Alan_37
Posts: 179
Joined: Sun May 01, 2016 8:36 pm
Has thanked: 51 times
Been thanked: 54 times
Contact:

Re: Atmega2560 Port K ADC's not working Bug ?

Post by Alan_37 »

Hi Medelec

Just managed to use the ADC's on Port F instead of K only thing is I had to disable JTAG from Fuses
as it was pulling up PF4,5,6,7 to 3.3v

hope you can find what is wrong with Port K

Thanks

Post Reply