Compiling error

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 2 and 3.

Moderators: Benj, Mods

Post Reply
jgriffin
Posts: 22
Joined: Sat Jan 07, 2006 6:47 pm
Location: USA
Contact:

Compiling error

Post by jgriffin »

Ian, Steve,

I have a student who is writing a clock routine that contiains three loops, seconds, minutes and hours. Display is to the LCD. His simulation works but when he tries to compile and download to the PIC he gets the following error.

---------
Flowcode was unable to compile the flowcharts C code due to the following errors:
No compilation error information is available.

If your flowchart contains C code, please review this carefully. If you flowchart contains no C code, or you have thoroughly reviewed the code, contact technical support.
----------

Any ideas?

Jack

User avatar
Benj
Matrix Staff
Posts: 15312
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Has thanked: 4803 times
Been thanked: 4314 times
Contact:

Post by Benj »

Hello

Send me the code and I will see if I can get it working.

jgriffin
Posts: 22
Joined: Sat Jan 07, 2006 6:47 pm
Location: USA
Contact:

Attaching file

Post by jgriffin »

Ben,

Could you tell me how to attach a Flowcode file in a reply?

Thanks,

Jack

User avatar
Steve
Matrix Staff
Posts: 3418
Joined: Tue Jan 03, 2006 3:59 pm
Has thanked: 114 times
Been thanked: 422 times
Contact:

Post by Steve »

Hello Jack,

Please email the FCF and the C file to Ben at our "support" email address. We have not set this forum up to allow attachments yet.

RAMTEC
Posts: 18
Joined: Thu Jul 27, 2006 4:32 am
Location: Dominican Republic
Contact:

Compilation error

Post by RAMTEC »

Hello, i have the same problem and i dont have c code in my flow chart. Then, i check very carefully my flow chart and i don't see any problem. When i tray to compile, it put the following message.

Flowcode was unable to compile the flowcharts C code due to the following errors:
No compilation error information is available.

If your flowchart contains C code, please review this carefully. If you flowchart contains no C code, or you have thoroughly reviewed the code, contact technical support.

Any idea. Thank you

User avatar
Steve
Matrix Staff
Posts: 3418
Joined: Tue Jan 03, 2006 3:59 pm
Has thanked: 114 times
Been thanked: 422 times
Contact:

Post by Steve »

RAMTEC,

Please email the file to support@matrixmultimedia.co.uk

Post Reply