I2C Component

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 2 and 3.

Moderators: Benj, Mods

Post Reply
Mark
Posts: 209
Joined: Thu Oct 19, 2006 11:46 am
Location: Bakewell, UK
Has thanked: 20 times
Been thanked: 16 times
Contact:

I2C Component

Post by Mark »

Hi,

What is the current timescale on the I2C component?

The I2C commands in Boost-C do not seem clearly documented, you almost need to be good at C and know the protocol well to figure out what all the documentation means. If the component is a while off I will post on the C Forum and ask what the command syntax and hardware requirements are.

Thanks,

Mark
Go with the Flow.

saschech@gmx.de
Posts: 714
Joined: Wed Jan 31, 2007 12:41 pm
Has thanked: 1 time
Been thanked: 26 times
Contact:

Hi

Post by saschech@gmx.de »

I am also waiting for the I2c......
It was my 1.point to buy a fullversion of flocode3 pro.........!!!!!!!
If I read , the question is very old (2005) , my question is for
the translation "coming soon" to german.......

Regards
wolfgang

User avatar
Steve
Matrix Staff
Posts: 3418
Joined: Tue Jan 03, 2006 3:59 pm
Has thanked: 114 times
Been thanked: 422 times
Contact:

Post by Steve »

In terms of Flowcode components, I've got to finish 2 LIN components first. My next job will then be the I2C component.

As for a timescale, I would hope to have something by the end of the month - but this is a "best-case" figure.

Post Reply