Ping Pong PIC Program using Flowcode

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 2 and 3.

Moderators: Benj, Mods

Post Reply
SWEISS
Posts: 1
Joined: Sun Sep 10, 2006 8:25 pm
Location: Las Vegas, NV
Contact:
Contact SWEISS

Ping Pong PIC Program using Flowcode

Post by SWEISS »

I'm building a Ping Pong program for my final project at DeVry with a 16F84. I'm trying use Flowcode to program all five Eblock ports but only Port A and Port B are available in the drop down menus. Help!
Top
Ian
Posts: 110
Joined: Thu Sep 29, 2005 10:53 am
Location: Matrix Multimedia
Been thanked: 1 time
Contact:
Contact Ian

Post by Ian »

If you check the datasheet for the 16F84, and check the PIC window in Flowcode you will see that the 16F84 only has 2 ports.

To access the other ports you will need to use a larger PICmicro that has more ports on it.
Top
Post Reply

Return to “Flowcode V2 & V3”