I have a problem with a PIC16F631. It is not possible for me to configure this chip in PPP. If I try it, I get the remark "Unrecognised chip on command line: <PIC16F631>" and there is also no possibility to chose this chip in PPP.
IΒ΄m using:
Flowcode: 3.2.1
PPP: 3.9.12.26
Unrecognised chip on command line PIC16F631
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Hello
Sorry but this PICmicro device is not yet supported by PPP. If you are desperate to use this device then it may be possible to get a patch for PPP which allows this chip by emailing steve@matrixmultimedia.co.uk However he is very busy so do not expect an immediate responce.
Sorry but this PICmicro device is not yet supported by PPP. If you are desperate to use this device then it may be possible to get a patch for PPP which allows this chip by emailing steve@matrixmultimedia.co.uk However he is very busy so do not expect an immediate responce.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel