I am trying to write a simple comms do dah into a program I wrote a long time ago, I am using a USB to TTL cable (3rd party supplied) .. Can someone please point me in a direction of transmitting a series of letters from A to P. from the PIC chip at say every 0.5 seconds. The outputs are depending on the state of 20 input switches.
Cheers
Ian
Comms again
- goldwingers
- Posts: 118
- Joined: Wed Sep 06, 2006 1:22 pm
- Location: London
- Been thanked: 1 time
- Contact:
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Hello Ian
Sounds like you need to get a single character sorted and then the rest will be easy. Eg if you can get one character sent out then you know it will work correctly.
To do the rest you would just have to do a matrix of descision icons or you could use a C code switch statement.
The logic above would assign a certain letter to a variable eg 'A' through 'P' and then all you have left to do is to send out the contents of that variable.
Sounds like you need to get a single character sorted and then the rest will be easy. Eg if you can get one character sent out then you know it will work correctly.
To do the rest you would just have to do a matrix of descision icons or you could use a C code switch statement.
The logic above would assign a certain letter to a variable eg 'A' through 'P' and then all you have left to do is to send out the contents of that variable.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel