Rally Computer

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 2 and 3.

Moderators: Benj, Mods

Mikat
Posts: 258
Joined: Wed Nov 29, 2006 6:32 pm
Location: Finland
Has thanked: 7 times
Been thanked: 36 times
Contact:

Re: Rally Computer

Post by Mikat »

Benj wrote:
I didn't connect the reset pin on the lcd. You thinbk that maybe the problem?
I think you will probably have to at least connect the reset pin to the +ve power rail for the display to work, otherwise it may simply sit in reset mode.
Some models at KS108 displays are needs to connect the reset via 10Kohm at +5 v, and I test some display, the resistor need to be 10K, 1K didn't work...

Mika

stabmegane
Posts: 7
Joined: Thu Dec 22, 2011 3:42 pm
Has thanked: 1 time
Contact:

Re: Rally Computer

Post by stabmegane »

Never mind, i figured it out, i also added the reset pin as a variable and it 's working great now.
Thanks a lot for all your help.

stabmegane
Posts: 7
Joined: Thu Dec 22, 2011 3:42 pm
Has thanked: 1 time
Contact:

Re: Rally Computer

Post by stabmegane »

One more question,
Is it possible to make characters for the Glcd with a different resolution?
I mean make a character not 8x5 but 8x8 or somthing like this?
Thank you in advance

User avatar
petesmart
Valued Contributor
Valued Contributor
Posts: 395
Joined: Thu May 06, 2010 11:42 am
Location: Sydney, Australia
Has thanked: 187 times
Been thanked: 140 times
Contact:

Re: Rally Computer

Post by petesmart »

I have used an EB-057 with some success.. If you change the font from either 0,1,2,3 or 4 you will get a font size change.. Not sure if this helps...

Best regards

Pete
sorry about that Chief!

Post Reply