Pic 18F2420 PWM Disable
Posted: Sun Nov 02, 2008 8:02 pm
Hello together,
iΒ΄m working with the PWM generator at PIC 18F2420.
Everything is fine!! Starting and setting the PWM (Duty Cicle + Freqency) works.
....except PWM disable has no function. Once the PWM ist started you can`t turn it off again!!
Any ideas
BR
Dirk Bubley
....i found the solution. You must set in PWM disable th nldx(byte) to 1.
This will shut down the PWM output. Unfortunatly the output stays high after switch off.
BR Dirk
iΒ΄m working with the PWM generator at PIC 18F2420.
Everything is fine!! Starting and setting the PWM (Duty Cicle + Freqency) works.
....except PWM disable has no function. Once the PWM ist started you can`t turn it off again!!
Any ideas
BR
Dirk Bubley
....i found the solution. You must set in PWM disable th nldx(byte) to 1.This will shut down the PWM output. Unfortunatly the output stays high after switch off.
BR Dirk