audio trans.

For Flowcode users to discuss projects, flowcharts, and any other issues related to Flowcode 2 and 3.

Moderators: Benj, Mods

Post Reply
arush
Posts: 14
Joined: Fri Apr 16, 2010 9:50 pm
Contact:

audio trans.

Post by arush »

(a) i just need to ask you if it is beneficial for speech signal transmission through zigbee purpose and if it is, than how and how i am gona start with it.

(b) what would you suggest me, if i use an anti aliasing filter in between a microphone and the zigbee coordinator side(the pic board ie. transmitter board), on the port-e.

(c) which pins of port-e can i use to connect for those three analog inputs.
Last edited by arush on Sat May 15, 2010 10:32 pm, edited 1 time in total.

User avatar
Benj
Matrix Staff
Posts: 14929
Joined: Mon Oct 16, 2006 10:48 am
Location: Matrix TS Ltd
Contact:

Re: audio trans.

Post by Benj »

a) The analyser is purely to allow you to see the messages and to inject messages if you require.

b) sounds good.

c) Depends on the chip your using. Normally port E only has pins 0 - 3.

arush
Posts: 14
Joined: Fri Apr 16, 2010 9:50 pm
Contact:

Re: audio trans.

Post by arush »

thanks

Post Reply