Hello,
The keypad compilation problem is probably occuring because the keypad has not been connected to any pins. Use the component connections window to assign some appropriate connections.
file save as problem
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: file save as problem
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: file save as problem
If you don't mind posting your flowchart on the forum, I sure the issue could be solved for you. I suspect if working then not working all of a sudden, then hardware could be to blame. (unless you are talking about your flowchart of course).
Martin
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: file save as problem
Won't be able to do anything with hex file unless the hardware details are know. E.g target name, and osc. speed, what ports switches are connect to, and what you would expect to happen at the o/p's.
Easiest way is upload the flowchart in question.
Easiest way is upload the flowchart in question.
Martin
-
- Matrix Staff
- Posts: 9520
- Joined: Sat May 05, 2007 2:27 pm
- Location: Northamptonshire, UK
- Has thanked: 2585 times
- Been thanked: 3815 times
- Contact:
Re: file save as problem
Just curious, have you ran Flowcode 4, then select 'Help' and "Online Resources....'?scorpy77 wrote:hello,
yesterday i noticed a wierd behaviour of flowcode4
Once your details are entered and approved, you will be able to post in V4 section.
Martin
- Benj
- Matrix Staff
- Posts: 15312
- Joined: Mon Oct 16, 2006 10:48 am
- Location: Matrix TS Ltd
- Has thanked: 4803 times
- Been thanked: 4314 times
- Contact:
Re: file save as problem
Hello all,
Scorpy has been confirmed as a pirate user and his forum account has been suspended.I HAVE DOWNLOADED 4.3 NOW. LET ME CHECK WITH THIS.
Regards Ben Rowland - MatrixTSL
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel
Flowcode Product Page - Flowcode Help Wiki - Flowcode Examples - Flowcode Blog - Flowcode Course - My YouTube Channel