Page 2 of 2
Re: Zigbee Question
Posted: Thu Sep 04, 2014 5:00 pm
by Benj
Hi Stu,
Is there anyway you can stream in the data say to a graphical LCD or into Flowcode itself so we can have a look and double check we are actually receiving the correct bytes in the packet?
Re: Zigbee Question
Posted: Thu Sep 04, 2014 7:31 pm
by acestu
Hi Benj,
I am posting a video of the lcd, and my chart, The 2 numbers at the bottom of the screen are supposed to be the MSB AND LSB received.
https://www.youtube.com/watch?v=PPsg__cfciU
cheers
Stuart
Re: Zigbee Question
Posted: Sat Sep 06, 2014 7:39 pm
by acestu
Hi,
I have checked the router and I can't find the config that the other guy has ie Zigbee router AT, is mine on the right setting ?
cheers
acestu
Re: Zigbee Question
Posted: Fri Oct 23, 2015 8:07 pm
by acestu
Hi,
I see that somebody else is interested in this thread so I will let you know that it turns out that I had the wrong firmware installed in my zigbee radio and the guys on the Digi forum told me where and how to flash with new firmware.
cheers
Stuart
Re: Zigbee Question
Posted: Thu Dec 10, 2015 10:14 pm
by acestu
Hi,
Now that I have a logic analyzer I took a few snapshots of the incoming data-frame, with a ds18b20 connected:
Thanks
Stuart
Re: Zigbee Question
Posted: Thu Dec 10, 2015 10:42 pm
by acestu
Hi,
These pics give a better idea of what is going on,
With 0 volts on pin D3 this is what I get:
With 5 volts on pin D3 this is what I get:
Thanks
Stuart