FC 6.0.7.0 ( 28.03.2014 )
Theme: Template
Scrolling Project Description
After Click to the Template and want scroll the Project Description, the project Description is not scroll, the Icon;s of Temlate is scrolling .. and hidden...
Again click to other Template the Field will be white... and must restart the process "open a Template" for can selecting ..
Pics added.
Rudi
FC 6 Patch/Release 6.0.7.0 known problems
Moderator: Benj
CAL_ADC SAMPLE_MODE
Simple make a Simple Project.
Here a simple PIC18F2550
Add CAL_ADC Icon
Add ICON MAKRO To Flowchart
Select the ICON MAKRO in Flowchart
Try to Click at Sample_Mode for a Value
like this
FC makes a Exception..
Is FC6 in Debug Modus?
Why i ask.
The Exception Messages are not controlled by FC.
try.. except .. finaly ...
Is it possible in next Release to make a General Option "Debug Modus off" or "Do not show unknown Exception".
This will be fine.
FC must be close after this!
Here is the same :
http://www.matrixmultimedia.com/mmforum ... 880#p60148
Pics added
Rudi
Here a simple PIC18F2550
Add CAL_ADC Icon
Add ICON MAKRO To Flowchart
Select the ICON MAKRO in Flowchart
Try to Click at Sample_Mode for a Value
like this
FC makes a Exception..
Is FC6 in Debug Modus?
Why i ask.
The Exception Messages are not controlled by FC.
try.. except .. finaly ...
Is it possible in next Release to make a General Option "Debug Modus off" or "Do not show unknown Exception".
This will be fine.
FC must be close after this!
Here is the same :
http://www.matrixmultimedia.com/mmforum ... 880#p60148
Pics added
Rudi